GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Jigsaw blade, 10 TPI, HCS, U-shaped handle, 2 pieces, clean cut 57T525 by GRAPHITE is a jigsaw blade with 10 TPI tooth density, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Suitable for cutting softwood, chipboard, carpenter's plywood, fibreboard 3-30 mm thick and plastic/epoxy (diameter <30 mm). GRAPHITE brand blade enables clean cutting.
Velcro sanding discs 125 mm, P40, 5 pieces, without holes 58T180 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P40 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
HSS metal drill bit, DIN 338, 13 mm 54T926 by GRAPHITE is a metal accessory characterised by a diameter of 13 mm, an overall length of 151 mm and a working part length of 101 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
Saw blade, widia, 185 x 30 mm, 36 teeth 57T218 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 36 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Set of concrete drill bits:3, 4, 5, 6, 7, 8, 9, 10 mm, 8 pieces 56T500 by GRAPHITE is a set of 8 drill bits for working in concrete, aerated concrete, brick and masonry, equipped with a practical cylindrical handle. The set includes tools with diameters: 3, 4, 5, 6, 7, 8, 9 and 10 mm. It will prove its worth for many tasks.
Yellow sanding paper in roll 2.5 m x 115 mm, P100, 58T423 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Velcro sanding papers 93 x 185 mm, P40, 5 pieces, with 8 holes 58T240 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain is 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
GRAPHITE's 20mm 56T732 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
The Hex 2.0 mm wood drill 54T576 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX chuck. It is characterised by a diameter of 2 mm and a length of 69 mm. It is suited to tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry and wet 57T318 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Saw blade, widia, 130 x 30 mm, 16 teeth 57T204 by GRAPHITE, with an external diameter of 130 mm and a mounting hole diameter of 30 mm. It has 16 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The 100 mm nylon wheel brush with 6 mm shank 57T423 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.
The 150 x 32 mm, crimped wire wheel brush 57T435 by GRAPHITE is made of crimped steel wire. Its maximum speed is 6000 rpm. The product meets the requirements of EN 1083-2 and the set includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
Saw blade, widia, 185 x 30 mm, 60 teeth 57T221 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The HSS metal drill bit, DIN 338, 8.5 mm 54T914 by GRAPHITE is an accessory for metal, characterised by a diameter of 8.5 mm, an overall length of 117 mm and a working part length of 75 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
The GRAPHITE 57T302 solid diamond cutting wheel, 180 x 22.2 mm, wet 57T302 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Wood drill bit set: 4, 5, 6, 8, 10 mm, 5 pieces 54T574 by GRAPHITE is a set of 5 drill bits with diameters from 4 to 10 mm with a practical cylindrical handle. They allow drilling to various depths in wood and plywood. They are characterised by an overall length from 75 to 120 mm and a maximum speed for each diameter: 4 mm - 1800 rpm, 5 mm - 1700 rpm, 6 mm - 1400 rpm, 8 mm - 900 rpm, 10 mm - 700 rpm. They will work well for many DIY projects.
Water sandpaper 230 x 280 mm, P2200, 58T230 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
