GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
GRAPHITE's 46mm bi-metal hole saw 56T711 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 190 rpm, Inox steel - 95 rpm, aluminium - 285 rpm, wood - 230 rpm, cast iron - 125 rpm, brass - 250 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Wood hole saws 26 - 63 mm, h 50 mm, set of 7 pieces 56T750 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 50 mm and the maximum drilling depth is 42 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
The HSS metal drill bit, DIN 338, 7 mm 54T978 by GRAPHITE is a metal accessory characterised by a diameter of 7 mm, an overall length of 109 mm and a working part length of 69 mm. The drill bit is made from HSS high speed steel. It has a cylindrical shank and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
Velcro sanding papers 93 x 185 mm, P150, 5 pieces, with 8 holes 58T245 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
The circular wire brush 200 x 32 mm, crimped wire, steel 57T401 by GRAPHITE is made of crimped steel wire. Its maximum speed is 4500 rpm. The product complies with the EN 1083-2 standard and includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
Kvaliteetne takjakinnitusega lihvpaber on mõeldud kasutamiseks lihvraual mõõtmetega 98 × 140 mm. P60 terasuurus sobib puidu, metalli, värvitud ja lakitud pindade efektiivseks eeltöötluseks ning ebatasasuste eemaldamiseks. Viie tolmuärastusavaga lihvpaber tagab parema tolmueemalduse, puhtama tööpinna ja pikendab lihvmaterjali kasutusiga. Takjakinnitus võimaldab kiiret ning mugavat lihvpaberi vahetamist.
Sanding paper yellow 230 x 280 mm, P40, 58T200 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
Bit set 25 mm, with magnetic holder 60 mm, 33 pcs. 56T516 by GRAPHITE consists of 33 pieces: bits SL3/4/5/6/7, PH0/1/1/2/2/3/3, PZ1/1/2/2/2/3/3, H2/2.5/3/4/5/6, T10/15/20/25/30/40 in length 25 mm and magnetic holder 60 mm. All accessories have a 1/4" Hex chuck and are made from tough chrome vanadium steel (CrV) - ensuring versatility and adequate durability during use.
Velcro sanding papers 93 x 185 mm, P80, 5 pieces, with 8 holes 58T242 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Velcro sanding discs 125 mm, P40, 5 pieces, with 8 holes 58T288 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding papers 93 x 230 mm, P240, 5 pieces, unperforated 58T263 by GRAPHITE are P240 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding papers 93 x 185 mm, P120, 5 pieces, with 8 holes 58T244 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
GRAPHITE kvaliteetsed lihvpaberid on mõeldud kasutamiseks takjakinnitusega vibrolihvijatel ja viimistluslihvijatel. Mõõtudega 98 × 140 mm lihvpaberid sobivad puidu, metalli, pahteldatud pindade, värvitud detailide ning plastmaterjalide peeneks töötlemiseks.
P220 karedusega abrasiiv sobib eriti hästi viimistluslihvimiseks enne värvimist, lakkimist või muude pinnakatete pealekandmist. Peen tera aitab saavutada sileda ja kvaliteetse pinna, vähendades lihvimisjälgede nähtavust ning parandades lõppviimistluse kvaliteeti.
Takjakinnitus võimaldab lihvpaberit kiiresti ja tööriistavabalt vahetada. Viie tolmueemaldusavaga disain tagab tõhusa tolmueemalduse, vähendab abrasiivi ummistumist ja aitab saavutada ühtlasema lihvimistulemuse. Sarnase GRAPHITE lihvpaberiseeria tehniliste andmete järgi on tegemist 98 × 140 mm mõõdus, takjakinnitusega ja avadega lihvpaberitega.
Omadused:
Sobib vibrolihvijatele ja viimistluslihvijatele
Takjakinnitus kiireks ja lihtsaks vahetamiseks
5 tolmueemaldusava tõhusaks tolmukogumiseks
Sobib puidu, metalli, plasti, pahtli ja värvitud pindade lihvimiseks
GRAPHITE's 67 mm 56T715 bi-metal hole saw, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 130 rpm, Inox steel - 65 rpm, aluminium - 195 rpm, wood - 170 rpm, cast iron - 85 rpm, brass - 170 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The SDS Plus Double Spiral Concrete Drill 12 x 450 mm 56T129 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 12mm and an overall length of 450mm and a working length of 340mm. It will prove useful for many tasks around the home and in the workshop.
The 125mm Energy+ 18V cordless angle grinder 58GE130 by GRAPHITE is a cordless powered tool with the Energy+ system. It is compatible with 18V lithium-ion batteries. The recommended battery capacity is 4 Ah. It is characterised by reaching 10000 revolutions per minute and an M14 spindle thread. Equipped with a 125 mm diameter blade, it allows comfortable cutting of various materials. The two-position side handle and spindle lock make planned tasks easier and faster. This grinder model also features a keyless guard assembly. Its ergonomic shape makes work more pleasant. The GRAPHITE tool is recommended for DIY enthusiasts.
SDS Plus double helix concrete drill bit set 5 x 6 x 8 x 10 x 110 mm, 5 x 6 x 8 x 10 x 160 mm, set of 8 56T168 by GRAPHITE are concrete, brick and stone drill bits with double helix and SDS Plus chuck. They feature diameters of 5, 6, 8, 10 mm (at 110 mm length) and 5, 6, 8, 10 (at 160 mm length). They will prove useful for many tasks around the home and in the workshop.
Sanding canvas in roll 2.5 m x 115 mm, P60, 58T441 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
The circular wire brush 125 x 20 mm, crimped wire, steel 57T434 by GRAPHITE is made of crimped steel wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.3 mm (1/2"), 2 x 16 mm (5/8"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
Sanding cloth 230 x 280 mm, P220, 58T350 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for final smoothing of coatings.
