Metallitööpingid

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

GU 1 lihvpingi avariiseiskamisseade tagab kiire ja ohutu masina seiskamise hädaolukorras. Vastupidav lahendus tööohutuse parandamiseks töökodades ja tööstuses.

Komplekti sisu:

• Avariiseiskamisseade GU 1-le
• Paigaldamiseks vajalikud kinnitusdetailid

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

BLUE-LINE PRO 55 Weldon südamikpuuride komplekt professionaalseks metallipuurimiseks. Sobib magnetpuurpinkidele ning võimaldab kiiret ja täpset kuni 55 mm sügavust südamikpuurimist.

Südamikpuur sobib ideaalselt järgmiste materjalide töötlemiseks:

• Teras kuni 500 N/mm²
• Teras kuni 750 N/mm²
• Teras kuni 900 N/mm²
• Teras kuni 1100 N/mm²
• Roostevaba teras kuni 900 N/mm²
• Roostevaba teras üle 900 N/mm²
• Alumiinium, räni sisaldus alla 10%
• Alumiinium, räni sisaldus üle 10%
• Vask, messing, nikkel ja tina
• Plastid (GFK / CFK ehk klaas- ja süsinikkiudkomposiidid)
• Malm
• Hardox, Hastelloy, Inconel, Nimonic ja muud eksootilised materjalid
• Raudteerööpad

Sobib hästi ka:

• Teras kuni 1400 N/mm²

Kasutatav ka:

• Grafiit

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Suitable for core drills with diameter 18 - 56 mm and drilling depth 40 mm

• HARD-LINE 40 Universal Ø 18 - 65 mm

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

See on lisavarustus Metallkraft FSM 3060 täppispinnalihvimismasinale, mis võimaldab ristetteande täpsemat käsitsi reguleerimist.