METALLKRAFT

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

FSM 3060 pritsmekaitse ees ja külgedel aitab vähendada jahutusvedeliku pritsmeid ning lihvimistolmu levikut. Parandab tööohutust ja hoiab töökeskkonna puhtamana.

Komplekti sisu:

• Eesmine pritsmekaitse
• Külgmised pritsmekaitsed
• Paigaldamiseks vajalikud kinnituselemendid
• Kasutus- ja paigaldusjuhend

Omadused:

• Vähendab jahutusvedeliku pritsmete levikut
• Piirab lihvimistolmu ja osakeste sattumist ümbritsevasse töökeskkonda
• Suurendab kasutaja tööohutust
• Aitab hoida masina ümbruse puhtamana
• Spetsiaalselt FSM 3060 mudelile sobiv lahendus

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths