Saekettad ja -terad

Saw blade, widia, 254 x 30 mm, 80 teeth, universal 55-548 by NEO TOOLS is equipped with 80 teeth, 2.5 mm x 2 mm, made of TCT carbide. The FWF tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 6,100 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting steel profiles, aluminium and other non-ferrous metals (such as copper), as well as plastics, wood with small nails, OSB, plywood, branches and laminates. The use of compensating notches reduces noise levels and the slots increase tool stability and cutting accuracy. The product from the NEO TOOLS brand ensures clean and precise work.

Sabre saw blade, HCS, 228 x 19 x 1.3 mm, 3 TPI, set of 2 pieces 58-043 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 3 TPI toothing and a stroke of 8.5 mm. The tools have dimensions of 228 x 19 x 1.3 mm. They are designed for branches and wood without nails (20-175 mm) - they also work well for cutting firewood/firewood/fresh wood (20-175 mm diameter). The design of NEO TOOLS saw blades allows for both straight and coarse cutting, making quick garden work easier.

Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.

Õhemad lõikehambad ja ketas ise vähendavad lõiketakistust ning parandavad töö efektiivsust, võimaldades kiiremat lõikamist väiksema koormusega tööriistale. Vastupidav cermet-tehnoloogiaga hammaste konstruktsioon tagab suurepärase kulumiskindluse ning võimaldab lõigata kuni 32 mm paksust terast sujuvalt ja efektiivselt. Uuendatud hambavahede disain parandab metallilaastude eemaldamist, vähendades kuumenemist ja aidates säilitada stabiilset lõikekiirust ka intensiivsel kasutamisel. Lisaks toetab lamedate hammaste esipinna erilihv veelgi paremat laastueemaldust, mille tulemuseks on puhtam ja täpsem lõige.

Jigsaw blades, 8 TPI, HCS, T-handle, set of 2, clean cut 57-759 by NEO TOOLS are accessories with 8 TPI spacing and T-handle, offered in a set of 2. They are designed for clean cutting. Each blade has an overall length of 100mm, a working length of 74mm, a thickness of 1.5mm and a tooth spacing of 2.8mm. Applications include softwood, chipboard, carpenter's plywood, fibreboard 3-30mm thick, as well as plastics with a diameter of less than 30mm, allowing precise machining of common wood materials and selected plastics.

The saw blade, widia, 300 x 30 mm, 40 teeth 55-606 by NEO TOOLS is equipped with 40 teeth measuring 3 mm x 2.2 mm, made of TCT carbide. The MN65 manganese steel disc reaches a maximum speed of up to 6,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, chipboard, plywood, MDF, branches and laminates. The product ensures clean and precise work.

The sabre saw blade, HM, 152 x 19 x 1.2 mm, 6 TPI 58-033 by NEO TOOLS with 152 x 19 x 1.2 mm, 6 TPI toothing (4 mm pitch), is designed for cutting cellular concrete, glass fibre reinforced plastic wood, wood with nails (6-100 mm). The carbide (HM) blades provide durability in a variety of materials and the design enables precise plunge cutting. This sabre saw blade from NEO TOOLS is suitable for a wide range of applications requiring fast, straightforward guidance and tool resistance.

The saw blade, widia, 160 x 30 mm, 48 teeth 55-603 by NEO TOOLS is equipped with 48 teeth measuring 2.8 mm x 2 mm, made of TCT carbide. The MN65 manganese steel disc reaches a maximum speed of up to 11,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, chipboard, plywood, MDF, branches and laminates. The product ensures clean and precise work.

Jigsaw blade set, 6, 8, 10/21, 12, 21 TPI, HCS/HSS/BIM, T-handle, 10 pieces 57-755 by NEO TOOLS includes HCS/HSS/BIM blades of 6, 8, 10/21, 12 and 21 TPI - for cutting wood, plastics and thin sheet metal. The blades included are: HCS 6 TPI, 100/74 mm, gr. 1.2 mm, tooth spacing 4 mm - for fast, also curved cuts in softwood, chipboard, plywood and fibreboard; HCS 10/21 TPI blade, 100/74 mm, gr. 1.5 mm, 2.5/1.2 mm spacing - for clean, double and curved cuts in wood (3-30 mm) and plastics (<30 mm diameter); HCS 6 TPI saw blade, 100/74 mm, 100/74 mm, 1.5 mm thickness, 4 mm spacing - for clean cuts in wood/board (10-45 mm); HCS 8 TPI saw blade, 100/74 mm, 100/74 mm, gr. 1.5 mm, 2.8 mm spacing - for clean cuts in wood/panel (3-30 mm) and plastics (<30 mm); HCS 12 TPI saw blade, 75/50 mm, gr. 1.0 mm, 2 mm spacing - for basic and curved cuts in softwood (2-15 mm), chipboard, joinery and fibreboard; HSS 21 TPI saw blade, 75/50 mm, gr. 1.0 mm, pitch 1.2 mm - for basic cuts in thin metal sheets (1-3 mm); BIM blade 21 TPI, 75/50 mm, gr. 1.0 mm, pitch 1.2 mm - for basic cuts in metal (1-3 mm sheets). Various lengths and thicknesses ensure that the NEO TOOLS blade is matched to the task, and the mixed toothing allows you to combine a fast feed rate with a clean edge.

The sabre saw blade, HM, 228 x 24 x 1.2 mm, 6 TPI 58-034 by NEO TOOLS with 228 x 24 x 1.2 mm, 6 TPI toothing (4 mm pitch), is designed for cutting cellular concrete, glass fibre reinforced plastic wood, wood with nails (6-175 mm). The carbide (HM) blades provide durability in a variety of materials and the design enables precise plunge cutting. This sabre saw blade from NEO TOOLS is suitable for a wide range of applications requiring fast, straightforward guidance and tool resistance.

The saw blade, widia, 185 x 30 mm, 40 teeth 55-600 by NEO TOOLS is equipped with 40 teeth measuring 3 mm x 2.2 mm, made of TCT carbide. The MN65 manganese steel disc reaches a maximum speed of up to 10,000 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, chipboard, plywood, MDF, branches and laminates. The product ensures clean and precise work.

The saw blade, widia, 235 x 30 mm, 40 teeth 55-692 by NEO TOOLS is equipped with 40 teeth, 2.8 mm x 2 mm, made of tungsten carbide. The ATB tooth, with its special alternate geometry, guarantees increased cutting accuracy. The NEO TOOLS brand MN65 manganese steel disc has a maximum speed of up to 7,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, plywood, laminates, MDF. The tool ensures clean and precise work.

Sabre saw blade, HM, 228 x 24 x 1.2 mm, 6/8 TPI 58-039 by NEO TOOLS with 228 x 24 x 1.2 mm, 6/8 TPI toothing (stroke 3-4 mm), is designed for cutting pallets, fibreglass reinforced plastic, metal, wood with nails (5-175 mm). The carbide (HM) blades provide durability in a variety of materials. This sabre saw blade from NEO TOOLS is suitable for a wide range of applications requiring fast, straightforward guidance and tool resistance.

Sabre saw blade, HM, 228 x 24 x 1.2 mm, 8 TPI 58-037 by NEO TOOLS is an HM version blade with 8 TPI toothing, which has been designed for straight metal cuts in the 5-175 mm range. The carbide cutting edge provides high wear and heat resistance for longer life when working with profiles, pipes and sheet metal. The dimensions of 228 x 24 x 1.2 mm and the tooth spacing of 3 mm promote stable guidance and even cutting progress. As a result, the NEO TOOLS blade provides predictable results in typical assembly and service applications.

Saw blade, widia, 350 x 30 mm, 40 teeth 61-142 by NEO TOOLS is equipped with 40 teeth, 3.1 mm x 2.2 mm, made of tungsten carbide. The ATB tooth, with its special alternate geometry, guarantees increased cutting accuracy. The NEO TOOLS brand MN65 manganese steel disc has a maximum speed of up to 5,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, plywood, laminates, MDF. The tool ensures fast and precise work.

Saw blade, widia, 210 x 30 mm, 40 teeth 57-683 by NEO TOOLS is equipped with 40 teeth, 2.0 mm x 1.2 mm, made of tungsten carbide. The ATB tooth, with its special alternate geometry, guarantees increased cutting accuracy. The NEO TOOLS brand MN65 manganese steel disc has a maximum speed of up to 6,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting wood, wood-based materials, plywood, laminates, MDF. The tool ensures fast and precise work.