Tarvikud elektritööriistadele ja tööpinkidele

Lihvpaber kolmnurkne takjaga 32 × 92 mm, K60, K100, K180, 15 tk

02-54H008

Velcro sanding paper delta 32 x 92 mm, K 60, K 100, K 180, 15 pcs. 54H008 by GRAPHITE with a size of 32 x 92 mm. It is characterised by gradations 60, 100 and 180, and is designed for delta orbital sanders (e.g. GRAPHITE 59G336 sander). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 15 32 x 92 mm sanding papers is recommended for professionals and experienced DIY enthusiasts.

10,80€

Laost otsas. Tellides tarneaeg nädalat

Diamond hole saw 12 mm x M14

03-55303

The 12 mm x M14 diamond hole saw, 55-303 by NEO TOOLS, with a diameter of 12 mm and M14 thread, is designed for dry work with an angle grinder. The durable vacuum brazed (vacuum brazed) diamond blank and paraffin filling ensures cooling during drilling. The working length is 30 mm and the overall length is 60 mm, facilitating the drilling of typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.

13,60€

Laost otsas. Tellides tarneaeg nädalat

Karbiidkroonpuur 85 mm koos SDS+ adapteri ja tsentripuuriga

02-55H323

The 85 mm widia hole saw with SDS+ adapter and pilot drill 55H323 by GRAPHITE characterised by a hole saw diameter of 85 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The inner diameter is 79 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.

21,60€

Laost otsas. Tellides tarneaeg nädalat

Lihvkettad takjakinnitusega Ø150 mm P240, 5 tk

03-08996

Kvaliteetsed takjakinnitusega lihvkettad on mõeldud peenlihvimiseks ning viimistluspindade ettevalmistamiseks. P240 karedusega abrasiiv tagab sileda ja ühtlase tulemuse puhastamisel, vahelihvimisel ning viimistluskihtide ettevalmistamisel. Kettad sobivad kasutamiseks 150 mm lihvtallaga eksentrik- ja orbitaallihvijatel.

Lihvkettad on varustatud 9 tolmueemaldusavaga, mis aitavad töö käigus tekkiva tolmu efektiivselt eemaldada, parandades lihvimiskvaliteeti ja pikendades abrasiivi kasutusiga. Takjakinnitus võimaldab ketta kiiret ja mugavat vahetamist. Sobivad kasutamiseks NEO TOOLS mudeliga 04-721.

Tehnilised andmed:

Tootja: NEO TOOLS
Tootjakood: 08-996
EAN: 5907558475906
Läbimõõt: 150 mm
Kareduse aste: P240
Aukude arv: 9
Kinnitus: takjakinnitus (Velcro)
Kogus pakendis: 5 tk
Sobib mudelile: 04-721

2,19€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur liblik 14 x 152 mm

02-54T502

The paddle wood drill, 14 x 152 mm 54T502 by GRAPHITE is a paddle type drill with Hex shank, characterised by a diameter of 14 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpenter's shop.

1,50€

Laost otsas. Tellides tarneaeg nädalat

SDS+ kivipuur 10 x 160 mm, 4 lõikeservaga

02-54H109

Kinnitus: SDS Plus
Tüüp: raudbetoonipuur (QUATRO)
Läbimõõt: 10 mm
Kogupikkus: 160 mm
Otsik: peeneteralisest kõvasulamist ristotsik
Lõikeservade arv: 4 (QUATRO)
Spiraal: kahekordne spiraal
Sobivad materjalid: raudbetoon, betoon, müüritis, kivi

3,79€

Laost otsas. Tellides tarneaeg nädalat

Koonusfreeside komplekt 4–12, 4–20, 4–32 mm, TiN, 3 tk

02-54T300

Step drills: 4-12, 4-20, 4-32 mm, TiN, set of 3 pieces 54T300 by GRAPHITE are 3 pieces of drill bits made of high quality HSS steel. The tools are applicable when working with sheet metal and plastic. The set includes drill bits with diameters: 4-12, 4-20 and 4-32 mm.

11,20€

Laost otsas. Tellides tarneaeg nädalat

Puuride, otsikute ja padrunite komplekt, 120 tk

02-56H623

Drill and bit set, sockets, 120 items 56H623 by GRAPHITE is a comprehensive set of up to 120 items, recommended for both DIY and professional use. The convenient storage case includes: 11 spiral drills：1.5, 2, 2.5, 3, 3.2, 3.5, 4, 5, 6, 6.5, 8 mm; 88 bits 25 mm: PHILLIPS: #0X3, #1X3, #2X6, #3X4. SLOTTED:3X3, 4X3, 5X4, 6X4, 7X1. SQUARE: #0X3, #1X8, #2X6, #3X6. STAR: T10, T10, T15, T15, T20, T20, T25, T25, T27, T30. POZI：PZ0X2, PZ1X2, PZ2X6，PZ3X2. HEX(mm): 2, 2.5, 3, 4, 5, 6 mm, HEX (inches):5/64, 3/32, 1/8, 5/32, 3/16, 1/4"; 15 bits 50 mm: PHILLIPS: #1, #2, #3. POSI: #1, #2, #3. SQUARE: #0, #1, #2, #3 SLOTTED:3, 4, 5, 6, 7 mm; 5 magnetic bits 6, 8, 10, 11, 13 mm and magnetic holder. The accessories and tools are designed for a variety of projects and working with many types of materials.

37,10€

Laost otsas. Tellides tarneaeg nädalat

Keermepuur HSS TiN, M4 × 0,7 mm, HEX

03-08951

HSS TiN keermepuur võimaldab puurida ja keermestada ühe tööoperatsiooniga, muutes töö kiiremaks ja täpsemaks. Tööriist on valmistatud vastupidavast HSS kiirlõiketerasest ning kaetud titaannitriidkattega (TiN), mis suurendab kulumiskindlust ja pikendab kasutusiga. Sobib terase, alumiiniumi, vase ja teiste metallide töötlemiseks.

Tehnilised andmed:

Keerme mõõt: M4 × 0,7 mm
Materjal: HSS kiirlõiketeras
Pinnakate: TiN (titaannitriid)
Kinnitus: 1/4" HEX
Kogupikkus: 65 mm
Keermestusosa pikkus: 10 mm
Puurimisdiameeter: 3,3 mm
Maksimaalne pöörlemiskiirus: 1000 p/min

2,60€

Laost otsas. Tellides tarneaeg nädalat

Iseterituv SDS Max piik 18 × 400 mm

02-57H547

SDS Max, grooved, self-sharpening GRAPHITE auger (ref. 57H547) with a diameter of 18 mm and a length of 400 mm is designed for the mechanical forging of holes in concrete, stone and brick. Essential for construction work. The fluted finish reduces the risk of the tip sticking. No sharpening required.

13,40€

Laost otsas. Tellides tarneaeg nädalat

Teemantkroonpuuride komplekt 18, 22, 27, 35 mm, 4 tk

02-55H318

Teemantkroonpuuride komplekt sisaldab nelja kvaliteetset teemantkattega kroonpuuri läbimõõtudega 18, 22, 27 ja 35 mm.
Puurid on mõeldud täpsete avade tegemiseks keraamilistesse plaatidesse, portselanplaatidesse, klinkrisse, kivisse ja betooni. Vastupidav teemantkate tagab pika tööea ning puhtad lõikeservad.

Komplekti kuulub:

Teemantkroonpuur 18 mm
Teemantkroonpuur 22 mm
Teemantkroonpuur 27 mm
Teemantkroonpuur 35 mm

Kokku 4 kroonpuuri.

Tehnilised andmed:

Kroonpuuride mõõdud: 18, 22, 27, 35 mm
Kinnituse tüüp: M14
Maksimaalne puurimissügavus: 30 mm
Teemantkatte kõrgus: 10 mm
Maksimaalne pöörlemiskiirus: 13 000 p/min
Materjal: teras C45

Sobivad materjalid:

Keraamilised plaadid
Portselanplaadid
Klinker
Looduskivi
Betoon

66,01€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber takjaga 180 mm, K180, 5 tk, 8 auguga, lihvijale 59G263

02-54H024

Velcro sanding disc 180 mm, K180, 5 pcs, with 8 holes for the 59G263, 54H024 grinder by GRAPHITE with a diameter of 180 mm and gradation K180. The pack contains five pieces of discs, designed for the 59G263 GRAPHITE plaster grinder. The accessories have 8 practical holes, spaced at 110 mm. The Velcro discs are made from type C paper. They are characterised by a half-open grit and grain made from electro-corundum. They will be suitable for both professional use and DIY tasks.

3,79€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber kolmnurkne takjaga 140 × 140 × 80 mm, K60, 5 tk, aukudega

02-54H010

Velcro sanding paper delta 140 x 140 x 80 mm, K 60, 5 pcs. 54H010 by GRAPHITE with dimensions 140x140x80 mm. It is characterised by gradation 60, and is designed for delta orbital sanders (e.g. GRAPHITE 59G336 sander). The paper is recommended for use with wood, metal and plastic. The Velcro attachment facilitates efficient and quick changes. The paper has dust extraction holes, offering comfortable dust-free working and therefore more efficient sanding without overheating the material. The set of 5 sanding papers 140x140x80 mm is recommended for professionals and experienced DIY enthusiasts.

2,50€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur kuuskant 4,0 mm, 2 tk

02-54T705

Hex 4.0 mm metal drill bit, 2 pieces 54T705 by GRAPHITE is a set of 2 pieces of drill bits for working with metals. This drill bit features a diameter of 4 mm and dimensions - an overall length of 95 mm and a working length of 43 mm. It is DIN 338 compliant and has a tip angle of 118 degrees. GRAPHITE brand drills are suitable for both amateur and professional applications.

1,80€

Laost otsas. Tellides tarneaeg nädalat

Sabre saw blade, HM, 152 x 24 x 1.2 mm, 8TPI

03-58036

Sabre saw blade, HM, 152 x 24 x 1.2 mm, 8 TPI 58-036 by NEO TOOLS is an HM version blade with 8 TPI toothing, which has been designed for straight metal cuts in the 5-100 mm range. The tungsten carbide cutting edge provides high wear and temperature resistance for longer life when working with profiles, pipes and sheet metal. The dimensions of 152 x 24 x 1.2 mm and the tooth spacing of 3 mm promote stable guidance and even cutting progress. As a result, the NEO TOOLS blade provides predictable results in typical assembly and service applications.

16,41€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur liblik 28 x 152 mm

02-54T509

The paddle wood drill, 28 x 152 mm 54T509 by GRAPHITE is a paddle type drill with Hex shank, characterised by a diameter of 28 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpenter's shop.

2,19€

Laost otsas. Tellides tarneaeg nädalat

Turvaotsikute komplekt, 32 tk

02-56H618

Komplekti kuuluvad:

Torx Security: TS8, TS10, TS15, TS20, TS25, TS27, TS30, TS40
Turvakuuskant: 2, 2,5, 3, 4, 5, 6 mm ning 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
Tri-Wing: TW1, TW2, TW3, TW4
Quad-Wing: QW6, QW8, QW10
Spanner: 4, 6, 8, 10
65 mm kiirvahetusega otsikuhoidik

22,00€

Laost otsas. Tellides tarneaeg nädalat

Kolmnurk lihvpaber takjaga, K180, 12 auguga, 5 tk, lihvijale 59G264

02-54H034

K180 grade K180 triangular hole sanding paper, 5 pcs, for 59G264, 54H034 GRAPHITE sander. The pack contains five triangular sheet pieces, designed for GRAPHITE's 59G264 gypsum sander. The accessories have practical holes. The Velcro sanding paper is made of E material. It is characterised by a half-open coating and grain made of electro-corundum. It will be suitable both for professional use and during various DIY tasks.

5,10€

Laost otsas. Tellides tarneaeg nädalat

Abrasive sponge 125 x 25 x 90 mm, K120, angled

03-55923

Abrasive sponge 125 × 25 × 90 mm, P120, bevelled, 55-923 by NEO TOOLS is a 125 × 25 × 90 mm tool with gradation P120, designed for working metal, plastic and wood. The flexible backing and slanted profile allow even sanding of flat surfaces, edges and corners. The 125 × 90 mm format provides a comfortable grip when working by hand. The P120 model from NEO TOOLS proves its worth in many sanding tasks.

1,50€

Laost otsas. Tellides tarneaeg nädalat

Sabre saw blade, HCS, 152 x 19 x 1.3 mm, 6TPI, cpl. 2 pcs.

03-58042

Sabre saw blade, HCS, 152 x 19 x 1,3 mm, 6 TPI, set of 2 pieces 58-042 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 6 TPI toothing and 4 mm pitch. The tools have dimensions of 152 x 19 x 1.3 mm. They are designed for structural timber, plywood, plastic (6-100 mm), wood panels (<75 mm), chipboard and MDF (6-60 mm). The design of NEO TOOLS saw blades allows for plunge, clean and curved cutting, which facilitates various types of work.

6,10€

Laost otsas. Tellides tarneaeg nädalat