HSS metal drill bits, 1.5 - 6.5 mm, set of 13 pieces, 54T930 by GRAPHITE are metal drill bits characterised by diameters of 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6, 6.5 mm. They are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Sanding paper yellow 230 x 280 mm, P150, 58T205 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
Saw blade, widia, 115 x 22.23 mm, 24 teeth 57T200 by GRAPHITE, with an outer diameter of 115 mm and a mounting hole diameter of 22.23 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 13,500 rpm. Cutting type: high-speed cutting. The blade complies with EN 847-1. 22.23/20 mm and 22.23/16 mm reduction rings are included. Suitable for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The Wood Drill, Extended 16 x 400 mm 54T561 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 16 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Water sandpaper 230 x 280 mm, P60, 58T210 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
The Wood Drill, Extended 18 x 250 mm 54T571 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 18 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1000 rpm. It will work well for many DIY tasks.
Saw blade, widia, 200 x 30 mm, 24 teeth 57T225 by GRAPHITE, with an external diameter of 200 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 2.2 mm and the tooth angle is 15°. The maximum speed is 8,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Velcro sanding papers, iron 102 x 152 mm, P80, 5 pieces, with 11 holes 58T302 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the pieces and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
GRAPHITE's Wood Drill, Extended 16 x 250 mm 54T570 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 16 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Set of bits 25 mm and sockets with ratchet and magnetic holder 60 mm, 24 pcs. 56T559 by GRAPHITE is a set of SL4/6, PH1/2, PZ1/2, H3/4/5/6, T10/15/20/25/30 bits in 25 mm length and 1/4" H6/7/8/10/11/13 sockets. The set also includes a 60 mm magnetic holder, a 1/4" Hex to 1/4" square adapter and a 1/4" Hex x 8 mm reversible ratchet, 60T, 95 mm length. The set contains a total of 24 pieces of accessories and tools, useful for many tasks. All items are made from CrV steel. A suitable choice for anyone who values reliability and comfort.
GRAPHITE's SDS Plus Double Spiral Concrete Drill 10 x 410 mm 56T120 is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 10mm and an overall length of 410mm and a working length of 310mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's 57T324 diamond grinding wheel, 2 segments, 125 x 22,2 mm, dry 57T324 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
HSS metal drill bit, DIN 340, 12 mm, 54T912 by GRAPHITE is a metal drill bit characterised by a diameter of 12 mm, an overall length of 205 mm and a working part length of 134 mm. It is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It features compliance with DIN 340 and is suitable for every DIY enthusiast.
Spiral wood drill, 10 x 230 mm 54T552 by GRAPHITE is a drill bit designed for working with wood and plywood, featuring a hexagonal chuck, and a spiral design. It features a diameter of 10 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.
GRAPHITE's 10 x 400 mm 56T211 concrete drill bit with cylindrical shank, has a diameter of 10 mm, an overall length of 400 mm and a working length of 240 mm. Recommended for concrete, brick and stone applications.
GRAPHITE's 68 mm 56T716 bi-metal hole saw, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 130 rpm, Inox steel - 65 rpm, aluminium - 190 rpm, wood - 165 rpm, cast iron - 85 rpm, brass - 165 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Bit set with magnetic handle with ratchet 115 mm, 21 pcs. 56T560 by GRAPHITE consists of 21 pieces, including 25 mm long bits: SL3, SL4, SL5, SL6; PH0, PH1, PH2, PH3; PZ0, PZ1, PZ2, PZ3; H3, H4, H5, H6 and T10, T15, T20, T25. Also included is a 115 mm long magnetic ratchet handle. The handle is additionally equipped with an ergonomic two-component handle for comfort and a secure grip during work. The bit set with magnetic chuck and ratchet from the GRAPHITE brand is a versatile solution for many DIY challenges.
Saw blade, widia, 125 x 22.23 mm, 24 teeth 57T202 by GRAPHITE, with an outer diameter of 125 mm and a mounting hole diameter of 22.23 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 13,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 22.23/20 mm and 22.23/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The TiN, 5 mm 54T404 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 5 mm and an overall length of 69 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
Endless belts 75 x 533 mm, P150, 3 pcs. 58T371 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and a grain of electro-corundum. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
