Tarvikud metallitööpinkidele

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Suitable for core drills with diameter 18 - 60 mm and drilling depth 55 mm

• HARD-LINE 40 Universal Ø 18 - 60 mm

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

• 100% torsion-proof
• For steel, VA, non-ferrous metal, aluminum
• For all common thread sizes
• From 1.0 mm wall thickness
• For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

OPTIMUM GU 3 VARIO masinaalus 1,5 kW võimaldab lihvmasina kiiruse sujuvat reguleerimist vahemikus 6–37 m/s. SIEMENS Sinamics V20 sagedusmuundur, kompaktne konstruktsioon ja jahutusvee alus tagavad professionaalse ning töökindla kasutuse.

Tehnilised andmed:

• Mootori võimsus: kuni 1,5 kW
• Perifeerne kiirus: 6–37 m/s
• Kiiruse reguleerimine: sujuv (astmeteta)
• Sagedusmuundur: SIEMENS Sinamics V20
• Jahutusvee alus: jah
• Konstruktsioon: kompaktne, väikese ruumivajadusega
• Lihvpink: ei kuulu komplekti

Komplekti sisu:

• GU 3 VARIO masinaalus
• SIEMENS Sinamics V20 sagedusmuunduriga ajamisüsteem
• Jahutusvee alus
• Elektriline juhtimis- ja reguleerimissüsteem

Märkus: lihvmasin tuleb tellida eraldi.

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Steel < 1400 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• graphite

• rails

• manufactured in elaborate pre-middle trimmer geometry
• Thus: vibration-free, quiet and easy cutting with maximum service life

• Made with conical spiral
• Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

• Only equipped with Sandvik carbide teeth
• NOTE: Only the best carbide is good enough for Karnasch core drills