UUED TOOTED

• Chuck made of cast iron
• With cylindrical center mount according to DIN 6350
• Incl. chuck key
• Concentricity better than 0.05 mm
• Feed flange required

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Degree parts over 360° scale
• Seven locking discs for 2/3/4/6/8/12/24 divisions

• Precision cone roller bearings
• Stability even under high stress
• 24 positions (15° pitch)
• Large spindle bore, for clamping longer workpieces
• Three-jaw lining
• Direct parts via latboards for higher production speed for mass parts
• Including clamping disc with 3 grooves

RTE 165

• 24 divisions with direct part disc and angular degree parts over 360 degree angle scale - no groove, three-jaw lining mounted, no indirect partial disc
• 7 click discs for 2/3/4/6/8/12/24-er pitches
• Degree parts above 360° scale

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Angle scale on the steel holder head
• 40 different angular positions
• Height adjustment via knurled screw
• Steel holder head and steel holder with profile-ground toothing
• Play-free and repeatable clamping of the changeable holder
• For self-assembly

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Vise body made of high quality cast iron
• Guide surfaces hardened and ground
• Hardened and ground jaws
• With turntable, 360 ° rotatable

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Degree indexing via 360° scale with crank and vernier scale

• Precision cone roller bearings
• Stability even under high stress
• 24 positions (15° pitch)
• Large spindle bore, for clamping longer workpieces
• Three-jaw lining
• Direct parts via latboards for higher production speed for mass parts
• Including clamping disc with 3 grooves

RTU 165

• 24 divisions with direct part disc and angular degree parts over 360 degree angle scale - no groove, three-jaw lining mounted, with optional indirect partial disc swiel divisions in high number possible
• Degree parts over 360° scale with crank and nonius

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Emergency stop shutdown, no restart
• Stepless speed adjustment and rapid traverse
• Forward and reverse running
• Overload protection and limit switch
• For self-assembly

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Modular machine vice with high accuracy and repeatability for series and single part machining on CNC milling machines and machining centers.
• Modular - machine vice completely made of steel NiCrMo with hardness HRC60, tolerance 0,0015 mm
• Mobile jaws with very long guide to prevent lifting and skidding
• Guide surfaces hardened and ground
• Wide clamping range due to locking bolts with different hole spacings
• Long service life due to high quality
• Wrench included
• Model MVSP with fixed jaws, Model MVMP with pull-down jaws

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Fixed steady rest suitable for OPTIMUM lathe OPTIturn TU 2004V

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Vise body made of high quality cast iron
• Guide surfaces hardened and ground
• Hardened and ground jaws, replaceable
• Protected spindle
• By moving the jaws also exciting to the outside
• With turntable, 360 ° rotatable

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Chuck made of cast iron
• With cylindrical center mount according to DIN 6350
• Incl. chuck key
• Concentricity better than 0.05 mm
• Feed flange required

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Chip collection plates included in the scope of delivery
• Solid and heavy construction ensures stability

• Chip collection plates included in the scope of delivery
• Solid and heavy construction provides stability
• The rear mounting holes must be made by the customer

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• For face and copy milling
• Made of special steel - highly tempered
• High axial and radial run-out accuracy
• Milling body with uneven pitch for particularly smooth running and even cutting
• Base body and clamping shank form a single unit, resulting in a short overhang length and stable clamping
• No additional milling cutter arbor is used
• Special geometry for milling at high speed
• Economical, as the insert can simply be turned further when the cutting edge is blunt (can be used up to twelve times)
• Indexable inserts Ø 10 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Concentricity better than 0.06 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• 3 parts
• With carbide inserts
• TIN-coated
• aluminum box

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de