Kompressorid

A-DUO-MICRO SE 4.0-08 2x100 on statsionaarne kruvikompressor kahe suruõhumahutiga, mis tagab suure suruõhuvaru ning võimaldab katta lühiajalisi suuremaid õhutarbeid. Rihmülekandega kruvikompressor sobib töökodadesse ja tootmisettevõtetesse, kus hinnatakse töökindlust, energiasäästlikkust ja madalat mürataset.

Tehnilised andmed:

• Tootlikkus: 580 l/min
• Maksimaalne töörõhk: 8 bar
• Suruõhumahutite kogumaht: 200 l (2 × 100 l)
• Õhuväljalaske ühendus: 1/2"
• Kompressori tüüp: õliga määritav kruvikompressor
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz
• Helirõhutase: 61 dB(A)
• Mõõtmed (P × L × K): 1250 × 950 × 1430 mm
• Kaal: 198 kg
• Paigaldusviis: statsionaarne

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

• Maximum, robust equipment and best quality at a reasonable price
• Fully automatic on-off operation
• With all safety devices
• Fully wired

Quality electric motor

• Quality electric motor with high torque is equipped with a motor protection switch
• Start-up capacitor and start-up relief valve ensure easy start-up
• As standard with phase inverter for easy manual reversal of the direction of rotation

Compressed air compression via high-performance aggregate HOS

• The start-up relief valve ensures a light and pressure-free start
• High-performance unit made of gray cast iron and the low speed guarantee particularly quiet, low-vibration operation and a long service life
• This ensures an even longer life due to even less wear
• High-quality compressor with optimum lubrication for a long service life and high reliability
• Equipped with high quality suction filter
• The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the compressed air tools
• In addition with intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and longevity of the compressor
• The large fan wheel and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
• A sturdy belt guard made of metal ensures optimum protection of the components and high user safety
• Compressed air supply into the boiler via flexible armored hose line with heat protection prevents vibration fracture

High quality drive belt

• Powerful and economical drive
• The toothed drive belt facilitates start-up, improves smoothness and power transmission and reduces the Power consumption up to 30%
• Stable belt guard made of metal

Operation at the maintenance block

• Equipped with a high-quality CONDOR pressure switch MDR 5 with robust push button function for fully automatic on-off operation
• Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensation separation
• Two large pressure gauges indicate the tank and working pressure
• Air extraction at the maintenance block via a comfort safety quick coupling
• Only fixed screw connections at the maintenance block, no hose connections

Two compressed air supply points

• A compressed air extraction point for filtered compressed air
• A compressed air extraction point via direct outlet on the boiler with ball valve

Comfort safety clutch - the advantages.

• Comfort safety couplings from AIRCRAFT are the first manufacturer to be used as standard
• Two separate locking systems for maximum work safety
• Dangerous flogging of the hose is prevented

Comfortable and safe to transport and set up

• Ergonomically extended handle for easy transport in a nearly upright position - stress on the back by lifting is avoided
• Puncture-proof PU foam wheels and stable steering gear with parking brake enable easy transport
• The parking brake prevents rotation and rolling of the wheels and ensures an optimal level of the compressor
• With practical second transport handle on the boiler, with which the carrying of the compressor is facilitated

High-quality boiler with durable rust protection

• AIRCRAFT is the first manufacturer to equip the compressors of the AIRPROFI series as standard with internally and externally hot-dip galvanized boilers
• The AIRPROFI series boilers therefore come with a 15-year rust-proof warranty.

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Increased flexibility thanks to two compressed air tanks
• High-quality and expandable equipment
• Smooth and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

Increased flexibility thanks to two compressed air tanks

• Two 100 liter compressed air tanks ready mounted on a safety pallet
• Doubling of the air supply by switching on the second compressed air tank - an increased air requirement is covered at short notice
• Halving the tank volume by disconnecting the second compressed air tank - allows pressure to be built up quickly, e.g. for chiseling or sandblasting work

High-quality equipment

• Hot-dip galvanized compressed air tanks inside and out with a 15-year guarantee against rusting through
• Splash water protection in accordance with IP 54
• Flexible armored hose lines with heat protection prevent vibration fractures
• With phase inverter on the plug as standard
• Ready for connection with all fittings
• Additional equipment for compressed air preparation and discharge available

• Screw compressor with ribbed belt drive
• Start-stop operation via pressure switch, thereby saving energy compared to idling control
• Minimal and easy maintenance
• Ready for connection with all fittings
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Easily transportable and deployable thanks to the safety pallet.
• KK version as standard with automatic steam trap for the reliable and economical discharge of the condensate without unnecessary loss of compressed air
• K and KK version with refrigeration dryer as standard with pressure dew point at 3 °C, ambient temperature 25 °C

• Enabling the second compressed air vessel doubles the pressure vessel volume, thus creating a greater compressed air reserve. Helps to cover short-term peaks in compressed air requirements
• For, e.g., chisel, hammer or sandblasting work, the second vessel can be isolated from the compressed air supply. This halves the vessel volume helping to build up the pressure more quickly.

A-PLUS 38-10 VS on sagedusmuunduriga kruvikompressor, mis on loodud suure energiakasutuse efektiivsuse ja töökindluse tagamiseks tööstuslikes rakendustes. Muutuva kiirusega juhtimine kohandab kompressori tootlikkuse tegelikule õhutarbimisele, vähendades energiakulu ja tööshoidmise kulusid. Vastupidav konstruktsioon, kvaliteetsed komponendid ning NRG mikroprotsessorjuhtimine tagavad stabiilse töö ka intensiivsel kasutamisel.

Tehnilised andmed:

• Mootori võimsus: 37 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Maksimaalne töörõhk: 10 bar
• Efektiivne tootlikkus: 2050-5200 l/min
• Õhuühendus: 1¼"
• Müratase: 72 dB(A)
• Mõõtmed (P × L × K): 1530 × 830 × 1440 mm
• Netokaal: 725 kg
• Kompressori tüüp: õliga määritav kruvikompressor
• Paigaldusviis: statsionaarne
• Juhtimine: NRG mikroprotsessorjuhtimine
• Ajam: Poly-V ribirihmülekanne
• Mootori efektiivsusklass: IE3

Komplekti kuulub:

• Kruvikompressor A-PLUS 38-10 VS
• Integreeritud NRG juhtsüsteem
• Sagedusmuundur
• Täht-kolmnurk käivitus
• Kombijahuti
• Tsentrifugaalventilaator

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Service-friendly: easy removal and installation of all components requiring maintenance

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely

Tehnilised andmed:

• Maksimaalne töörõhk: 13 bar.
• Suruõhumahuti maht: 2 × 75 l (kokku 150 l).
• Imemisvõimsus: 575 l/min.
• Efektiivne tootlikkus: 460 l/min (6 bar juures).
• Mootori võimsus: 4,0 kW.
• Toitepinge: 400 V / 50 Hz.
• Silindreid: 2.
• Surveastmeid: 2.
• Pöörlemiskiirus: 850 p/min.
• Müratase: 79 dB(A).
• Mõõtmed (P × L × K): 1200 × 900 × 1140 mm.
• Kaal: 230 kg

• Absolutely Low maintenance drive with maximum energy efficiency thanks to directly coupled coaxial screw compressor
• EasyTronic IV control as standard prevents motor overload, reduces wear and ensures a longer service life
• High cooling effect and Lower noise level thanks to the thermostatically controlled radial fan
• Longer service life of the device and less fluctuations in the oil temperature thanks to the thermostatically controlled fan, optimal cooling air flow and generously sized heat exchanger
• Less effort for drying and filtering the generated compressed air Integrated aftercooler
• warrantyd compliance with the maintenance intervals by recording the load and run-on times via the operating hours counter
• Display of the maintenance requirement via automatic notification
• Avoiding damage during commissioning or after changing location through integrated direction of rotation control for the motor
• Service-friendly due to optimal accessibility and simple assembly / disassembly of all components to be serviced
• Easy transport and assembly due to small external dimensions
• Monitoring as standard the engine and compressor speed through SpeedTronic Control control
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks

Based on the frequency converter technology, the delivery quantity of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced cutting-edge technology in the smallest of spaces.

• Active energy saving
• Ideal for frequently changing compressed air consumption
• The speed-controlled compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates greatly.

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Service-friendly: easy removal and installation of all components requiring maintenance

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance