UUED TOOTED

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide

• Equipped with movable eccentric clamping device
• Integrated angle cutting device on the sliding carriage - for fast and precise miter cuts
• Scoring device with belt drive

• TERSA planer blade system enables particularly quiet running.
• Slanted toothed steel roller for constant and even material feed
• Material feed with separate motor and two speeds
• Numeric display for the thickness of the table height
• The 2,000 mm long dressing tables allow easy dressing of large workpieces.
• Worktables are made of cast iron, re-annealed and stress-free, thus insensitive and durable plan
• Sturdy large aluminum dressing fence with round bar guide (1200 x 160 mm)
• Thick table adjustment via handwheel with numerical display for the planing height
• The high machine weight ensures highest precision and smooth running
• Powerful industrial engine
• Robust steel / cast iron construction

• TERSA quick-change system for changing planing knives in seconds and particularly quiet running
• Diagonally toothed steel feed roller for constant and even material feed
• Robust dressing tables made of ribbed grey cast iron, milled and stress-free, thus insensitive and permanently flat
• Large dressing fence for precise dressing, reversible from 90 to 45 degrees, with quick clamp
• Dressing table opens to the rear
• Powerful motor
• Robust steel/cast iron construction
• Oblong hole drilling device can be retrofitted

• Telescopic fence that can be swiveled from -45° to +45°
• Robust and precise design with sliding carriage
• The cast iron work table enables low-vibration work
• Saw blade tilt from 90° to 45
• Double-suspended saw unit
• Mitre fence and hold-down device can be moved over the entire length of the carriage
• Large work table and standard table extension for cutting widths up to 1220 mm

• Telescopic fence that can be swiveled from -45° to +45° with finely adjustable stop flap
• Robust and precise design with sliding carriage
• The cast iron work table enables low-vibration work
• Saw blade height adjustment via handwheel
• Saw blade tilt adjustable from 90 to 45° via handwheel with scale
• Double-suspended saw unit guarantees vibration-free and precise work
• Solid outrigger table with roller and telescopic arm for maximum stability
• Mitre fence and hold-down device can be moved over the entire length of the carriage
• Large aluminum parallel fence on round bar guide
• Powerful drive motor for constant cutting speed, even at a cutting height of 100 mm

• For all slitter shaft diameters and all table settings
• Easy handling and exact cutting edge projection

BKS 500 ehitussaepink nõudlikuks puidutööks. 500 mm saeketas, lõikekõrgus kuni 150 mm, 4,2 kW mootor, 400 V toide ja lauapikendus.

Tehnilised andmed:

• Mootori sisendvõimsus: 4,2 kW
• Mootori väljundvõimsus: 3,3 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Voolutarve: 7,1 A
• Mootori kaitseklass: IP54
• Mootori töörežiim: S6 40%
• Mootori energiatõhususe klass: IE3
• Saeketta läbimõõt: 500 mm
• Saeketta ava läbimõõt: 30 mm
• Saeketta pöörlemiskiirus: 2800 p/min
• Maksimaalne lõikekõrgus 90° juures: 150 mm
• Maksimaalne lõikelaius paralleeljuhikuga: 370 mm
• Maksimaalne ristlõike pikkus: 250 mm
• Töölaua mõõtmed: 1000 × 660 mm
• Töölaua kõrgus: 850 mm
• Lauapikenduse mõõtmed: 800 × 400 mm
• Äratõmbeühenduste läbimõõt: 50 / 95 mm
• Pikkus: ca 1870 mm
• Laius/sügavus: ca 810 mm
• Kõrgus: ca 1170 mm
• Netokaal: ca 103 kg
• Komplektis saeketas: Ø 500 mm, Z44
• Komplektis: lükkepulk, saeketta vahetamise tööriist ja kokkuklapitav lauapikendus

• The work table made of heavily ribbed grey cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free work
• Maximum length for formatting 1200 mm
• Format sliding carriage made of anodized aluminium
• Cutting plane directly on the saw blade
• Saw unit can be tilted up to 45 degrees
• Powerful motor
• Trimming frame with aluminium crosscut fence and folding fence for panels and large workpieces
• Rip fence as standard with round bar guide and fine adjustment
• High-quality machine at a real entry-level price
• Made in Europe

• Control unit with electronic display for programmed, motorised height adjustment and tilting of the sawing unit
• Cast iron saw unit warrantys torsional rigidity and vibration-free operation
• Sawing unit with permanently precise double swivel segment guide, 6 years Holzkraft warranty on wear of the swivel segments
• Large edging frame with roller facilitates panel feeding
• Telescopic ruler with two professional folding stops
• Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened steel guide tracks, 10-year warranty on wear of the guide tracks
• Scoring device equipped with its own drive and easily adjustable from the outside
• Two-position saw blade anti-sway device manually adjustable
• A 3 version with three-axis control additionally equipped with motorized rip fence with electronic positioning, position indication via encoder, adjustment via ball screw, infinitely variable adjustment via switch or automatic positioning and possibility of incremental adjustment
• UP version with swivelling control panel for maximum flexibility
• X-version with Compex mitre fence for fast and accurate execution of mitre cuts, automatic compensation of the fence position. (length compensation)
• Optionally available: two saw blade speeds, cross-cut fence with digital display
• Made in Italy

• Cutting plane directly on the saw blade
• Heavy cast steel construction
• Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened, 10-year guarantee on wear of the guideways
• Large trimming frame guided on telescopic arm and longitudinally adjustable
• Angle-adjustable aluminum telescopic fence with professional fence flaps
• Rip fence with quick clamping and fine adjustment
• Large work table made of milled gray cast iron remains permanently flat
• The standard table extension and table extension make it easy to work with larger workpieces
• Smooth running and precise cuts
• Equipped with a powerful three-phase motor
• The large-dimensioned saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life, 6-year Holzkraft warranty on wear of the swivel segments
• Maximum cutting height is achieved even when the scoring unit is installed
• Made in Italy

• L-jaws suitable for hydraulic machine vice OPTIMUM HCV 160

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide
• Equipped with movable eccentric clamping device
• Integrated angle-cutting device on the sliding table for precise mitre cuts
• Scoring device with powerful separate drive motor
• Equipped with high-quality trimming frame - with solid telescopic fence, integrated roller for easy loading and unloading, inclined scale for easy reading and practical eccentric clamp for secure hold
• Practical saw blade pendulum guard
• Motorized height adjustment and tilting of the saw unit
• Saw blade speed adjustable in two stages
• On/off switch integrated in the sliding carriage

• With TERSA knife shaft for a quick turn of planer blades
• TERSA planer blade system enables particularly quiet running
• Slant-toothed steel pick-up roller for constant and even logging
• The extra-long one-piece dressing tables allow easy dressing of the workpieces
• Large dressing stop can remain in its position when opening the dressing tables
• Rear-opening dressers
• The high machine weight ensures highest precision and smooth running
• Powerful industrial engine
• Robust steel / cast iron construction
• Worktables made of cast iron, re-annealed and stress-free, thus insensitive and durable plan
• Table lips for quiet running

• No adjustment and more screws
• Planer blade change in seconds
• Self-locking
• Especially low noise
• Perfect planing result

• The extraction nozzles of the tiller and thickness point in the same direction.
• The hose connection is made from only one side
• No hose is needed around the machine

• Stable chain drive
• Drive wheels made of steel
• Massive gray cast iron bearing block

• Massive kickback devices prevent the kickback of workpieces
• TERSA planer shaft with three knives ensures an optimal planer image

• Helical steel pick rollers for a constant and even feed of material without marks
• Several teeth simultaneously grip for powerful feed
• Wear-free unlike rubber feed rollers

• Simple and precise adjustment of chip removal for dimensionally accurate thickness planing
• Automatic workpiece feed
• Straight-toothed feed roller and rubber-coated pull-out roller for even feed without damaging the workpiece
• Easily adjustable aluminium planing stop, tiltable from 90° to +45°
• Large-dimensioned planing table made of ribbed die-cast aluminium
• Large thickness table made of grey cast iron with ground surface
• Integrated, foldable chip extraction hood

• Thickness planer for planing smooth surfaces at an angle and with high accuracy
• Stable professional planing fence swivels from 90 to +45°.
• Simultaneous folding up of the jointer tables with spring support for fast and convenient changeover to thicknessing in seconds
• Large-dimensioned dressing table made of grey cast iron with ground surface

• Thickness planer for accurate, angular planing of smooth surfaces
• Thicknessing table with central column guide, additional guide and mechanical counter (accuracy 0,1mm)
• Large dimensioned planing tables made of grey cast iron with ground surface
• Folding up of the planing tables with spring support for a quick and comfortable changeover to thicknessing in seconds
• Stable professional planing fence can be swivelled from 90 to +45°
• Space-saving lateral guidance of the planing fence
• High-quality workmanship and ergonomic design
• Oblong hole drilling device available as accessory

• Control unit with electronic display for programmed, motorised height adjustment and tilting of the sawing unit
• Cast iron saw unit warrantys torsional rigidity and vibration-free operation
• Sawing unit with permanently precise double swivel segment guide, 6 years Holzkraft warranty on wear of the swivel segments
• Large edging frame with roller facilitates panel feeding
• Telescopic ruler with two professional folding stops
• Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened steel guide tracks, 10-year warranty on wear of the guide tracks
• Scoring device equipped with its own drive and easily adjustable from the outside
• Two-position saw blade anti-sway device manually adjustable
• A 3 version with three-axis control additionally equipped with motorized rip fence with electronic positioning, position indication via encoder, adjustment via ball screw, infinitely variable adjustment via switch or automatic positioning and possibility of incremental adjustment
• UP version with swivelling control panel for maximum flexibility
• X-version with Compex mitre fence for fast and accurate execution of mitre cuts, automatic compensation of the fence position. (length compensation)
• Optionally available: two saw blade speeds, cross-cut fence with digital display
• Made in Italy

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide
• Equipped with movable eccentric clamping device
• Integrated angle-cutting device on the sliding table for precise mitre cuts
• Scoring device with powerful separate drive motor
• Equipped with high-quality trimming frame - with solid telescopic fence, integrated roller for easy loading and unloading, inclined scale for easy reading and practical eccentric clamp for secure hold
• Motorized height adjustment and tilting of the saw unit
• Saw blade speed adjustable in two stages
• On/off switch integrated in the sliding carriage
• Motor-adjustable rip fence
• Practical saw blade pendulum guard
• Pneumatic connection required
• The rip fence is clamped pneumatically

Ehitussaepink võimsaks puidu lõikamiseks. 500 mm saeketas, lõikekõrgus kuni 150 mm, 4,2 kW sisendvõimsus ja 400 V toide.

Tehnilised andmed:

• Mootori sisendvõimsus: 4,2 kW
• Mootori väljundvõimsus: 3,4 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Voolutarve: 7,1 A
• Mootori kaitseklass: IP44
• Mootori töörežiim: S6 40%
• Mootori energiatõhususe klass: IE3
• Saeketta läbimõõt: 500 mm
• Saeketta pöörlemiskiirus: 2800 p/min
• Maksimaalne lõikekõrgus 90° juures: 150 mm
• Maksimaalne lõikelaius paralleeljuhikuga: 305 mm
• Töölaua pikkus: 1000 mm
• Töölaua laius: 660 mm
• Töökõrgus: 850 mm
• Alumise äratõmbeava läbimõõt: 95 mm
• Saeketta kaitsekatte äratõmbeava läbimõõt: 50 mm
• Lauapikendus: 800 × 400 mm
• Pikkus: ca 1870 mm
• Laius/sügavus: ca 810 mm
• Kõrgus: ca 1170 mm
• Netokaal: ca 103 kg
• Komplektis saeketas: 500 × 30 × 4 mm, Z44
• Komplektis: lükkepulk, lükkekäepide, saeketta kaitsekate, saeketta vahetamise tööriist ja kokkuklapitav lauapikendus

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide

• Equipped with movable eccentric clamping device
• Integrated angle cutting device on the sliding carriage - for fast and precise miter cuts
• Scoring device with belt drive