HOLZKRAFT

• Solid cast iron bench bed for extremely smooth running
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Manual speed adjustment via 5-stage belt drive
• Easy switching between clockwise and counter-clockwise rotation

• Solid cast iron bench bed for extremely smooth running
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Manual speed adjustment via 5-stage belt drive
• Easy switching between clockwise and counter-clockwise rotation
• Can also be used as a stand-alone machine thanks to optional base frame

• Electrically movable bench bed extension via cylinder to a center width of up to 1016 mm
• Extremely high center height of up to 397 mm, workpieces of up to 790 mm diameter possible
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Comfortable working thanks to infinitely variable speed adjustment via frequency converter
• Practical 36-step spindle part adjustment for precise positioning of e.g. drill holes or milled holes

• Solid gray cast iron bench bed for smooth running
• Electrically movable bench bed extension via cylinder to a center width of up to 1016 mm
• Extremely high center height of up to 397 mm, workpieces of up to 794 mm diameter possible
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Comfortable working thanks to infinitely variable speed adjustment via frequency inverter
• Frequency inverter for better power development at low speeds
• Robust tailstock with trapezoidal thread and 120 mm quill travel
• Flexible working thanks to mobile control box with magnetic holder, can be positioned as required
• Digital speed display and right/left rotation changeover via the control box
• Practical 36-step spindle indexing device for precise positioning of e.g. drill holes or milling operations

• Ideal in woodworking plants, in joineries / carpentry stores and general trades
• Highly efficient air purification with high degree of separation
• Mobile device for use in different places in the workshop
• Easy handling
• Certified for ATEX Zone 2
• Long filter service life
• Delivered ready to plug in

• Fast tape tension via lever
• Upper band support with graphite coating
• 250 mm balanced belt rollers ensure optimum drive.
• With electric height adjustment
• With extraction and noise protection
• With noise protection certificate
• At two speeds
• Fits to surfaces through a swiveling sanding pad
• Beveled surfaces
• Standard with right and left rotation
• The fast belt tension allows quick and easy changing of the sanding belts.
• Delivery partially pre-assembled

• Universally applicable also for plastic, metal, glass, styrofoam, paper and the like
• Particularly robust construction
• Housing made of galvanized sheet steel
• Paddle wheel fan for increased suction power
• Significantly reduced dust content due to double-woven fine filter bag
• Extractors comply with dust class L
• Basic units are pre-assembled in modular design
• For large systems only short installation times
• Top value for money
• Short assembly times thanks to modular design

• Separate work table for solid wood and veneer sanding, manually swivelable by 45° and 35° respectively
• The stop for veneer sanding can be adjusted to an accuracy of 0.1 mm
• Motorized height-adjustable sanding unit
• Additional table with suction openings for sanding radii on the rubberized deflection roller
• Sanding sleeve device with attachable work table
• The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working
• Oscillating sanding belt with separate geared motor for better sanding results
• Oscillation can be switched on as required
• Abrasion-resistant and highly gliding plastic tracks on the work table surface
• Sanding pad with graphite coating for a longer service life of the sanding belt
• The spring-loaded belt tension automatically compensates for belt length differences
• Rubberized and grooved sanding drum
• Convenient operation from two sides on the rotating control panel above the machine
• Centrally positioned holder for feed unit

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
<
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• For milling, planing and sawdust (no dust)
• Significantly reduced dust content by BIA-tested filter material with a high degree of separation
• Housing parts and impellers made of high-strength special plastic
• Quick-release fasteners for filters and chip bags for trouble-free maintenance
• Robust, high-quality execution
• Easy to move through castors
• Low energy consumption
• Extractors comply with dust class L

• Fine dust filter cartridge with specially treated polyester fleece
• Retains finest particles
• High airflow, large filter surface
• Higher tear resistance and therefore longer service life

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• Ideal in woodworking plants, in joineries / carpentry stores and general trades
• Highly efficient air purification with high degree of separation
• Mobile device for use in different places in the workshop
• Easy handling
• Certified for ATEX Zone 2
• Long filter service life
• Delivered ready to plug in

• For milling, planing and sawdust (no dust)
• Significantly reduced dust content by BIA-tested filter material with a high degree of separation
• Housing parts and impellers made of high-strength special plastic
• Quick-release fasteners for filters and chip bags for trouble-free maintenance
• Robust, high-quality execution
• Easy to move through castors
• Low energy consumption
• Extractors comply with dust class L

• Fine dust filter cartridge with specially treated polyester fleece
• Retains finest particles
• High airflow, large filter surface
• Higher tear resistance and therefore longer service life

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction system to supplement an already existing stationary system.
• For universal use with various materials - also suitable for dry aluminum chips!
• 100% air recirculation without additional costs and constructional effort
• Delivery ready for connection
• High suction capacity
• Low costs for pipe components and installation, especially when replacing old and no longer approved systems
• Integrated pre-separation chamber to reduce the load and protect the filters
• Compact dimensions, allowing the units to be installed in previously unused areas
• Suction side can be ordered with orientation to the left or right, thus also possible use of workshop niches
• Control system expandable by plug-in technology
• From model RLA 2501 P
• :Optimal filter cleaning after added time after switch-offwith

• sanding unit can be swiveled up to 45 ° via lever
• The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working.
• Oscillating sanding belt with separate gear motor for better sanding results
• Oscillation optionally switchable
• sanding sole with graphite coating for a longer service life of the sanding belt
• Height-adjustable sanding table for utilization of the entire sanding belt width
• Height-adjustable additional table with suction for sanding radii
• The spring-loaded belt tension independently compensates for belt length differences.
• With double suction
• Extendable roller table extension
• With rubberized sanding roller
• Veneer edge sanding device with contact shoe with fine adjustment, unloading rollers and stop rulers
• With grooved feed ruler for veneer projections
• Quick change from veneer edging to solid wood sanding possible

• Unit swivel via handwheel from 90 - 45 °
• KSO 150 F equipped as standard with a sturdy console as preparation for mounting a feed unit
• Feed unit not included

• Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units
• Frame pressing device with two horizontal manual hydraulic pressing units
• Horizontal and vertical adjustment of the manual hydraulic pressing units possible
• Three manual hydraulic pressing units with ergonomic handle and comfort adjustment
• 5-position adjustable lower support with fail-safe device in the hole pattern

• Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units
• Torsion-resistant base frame made of sturdy welded frame construction with thick-walled profile tubes and laser-machined steel parts
• Three vertical pressure beams with roller bearings made of solid profile tubes, galvanized
• Frame pressing device with two horizontal manual hydraulic pressing units
• Horizontal and vertical adjustment of the manual hydraulic pressing units possible
• Three manual hydraulic pressing units with ergonomic handle and comfort adjustment
• Lower support with fail-safe device, 5-position adjustable in the hole pattern
• Powder-coated and glue-repellent frame components

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• For milling, planing and sawdust (no dust)
• Significantly reduced dust content by BIA-tested filter material with a high degree of separation
• Housing parts and impellers made of high-strength special plastic
• Quick-release fasteners for filters and chip bags for trouble-free maintenance
• Robust, high-quality execution
• Easy to move through castors
• Low energy consumption
• Extractors comply with dust class L

• Fine dust filter cartridge with specially treated polyester fleece
• Retains finest particles
• High airflow, large filter surface
• Higher tear resistance and therefore longer service life

• Removes 91% of all fine dust particles > 1 μm
• Adjustable in three stages
• Time recording forr automatic switch-off
• For cleaning the air in workshops, also suitable for exhibition and living rooms

• Highly efficient filter process removes particles > 5 μm and fine dust particles > 1 μm
• Designed to clean the air in workshops and exhibition rooms
• Ideal supplement to a stationary extraction system without fine filter
• In larger production areas also the use of several unitsrecommended directly at the machine or distributed in the room
• Adjustable in three steps
• Time recording for automatic switch-off
• Convenient operation via remote control
• Pre-filter easy to remove and clean

Examples, how often the air in certain rooms should be changed per hour:

• Assembly halls: 4 - 8 times
• Workshops: 8 - 10 times
• Laboratories: 8 - 15 times