Circular saw blades with HM tips GRAPHITE (ref. 55H547), outside diameter 216 mm and internal 30 mm, it has 60 teeth, allows for higher cutting speed. Circular saw blades based on the special design of the teeth and the use of special carbide. Universal circular saw blades, which doesn't need to be replaced when changing the material being cut. FWF teeth thanks to its special design and a wide part of the comb give guarantees strength. Designed for cutting various types of materials, e.g. steel and aluminum profiles and other non-ferrous metals, such as copper, plastics, wood with small nails, OSB boards, plywood, branches, laminates, etc. The use of compensation cuts reduces the noise level, and the gaps increase the stability of the blade and the accuracy of the cut. Circular saw blades ensures a clean cut.
GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 3 with teeth an inch long intended for cutting, among others fiber-cement boards, cellular concrete, red brick, glass, fiberglass-reinforced plastics, epoxy resin, abrasives using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Saw and plunge-cutting circular saw blade, Widia GRAPHITE (ref. 55H685) with external diameter 160 mm, made from special C50 steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and variable dentition 8/6 teeth per inch long intended for cutting, among others wood with nails, plastics, fiberglass-reinforced composites, epoxy resin, plasterboard, window frames, wood, metal, fiber cement boards using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Blade for reciprocating saw GRAPHITE about the length 150 mm and 3 with teeth an inch long intended for cutting, among others thick wood, pruning branches and bushes with saber sawsintended for cutting, among others thick wood, pruning branches and bushes with saber saws. The maximum thickness of the materials is 100 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
GRAPHITE WIDIA Saw and Plunge Blade (Ref. 55H687) 165mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.
GRAPHITE jigsaw blades are used for semi- precise cutting of wood and plastic. T shank allows to use the blades in all jigsaws with BOSCH holder and universal holder. Use of CrV steel (chromium- vanadium) gives high elasticity and resistance to high temperatures. Polished side surfaces of the blade reduce friction and blade heating during cutting.
Solid carbide saw blade GRAPHITE (ref. no. 55H605) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Solid carbide saw blade VERTO (ref. no. 61H108) with an outer diameter of 250 mm, reduced thickness allows to obtain higher cutting speed. Teeth with sintered carbide tips YG8A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Blades for reciprocating saw HCS/BIM GRAPHITE It is used in renovation, construction and demolition works as well as in home amateur work. Set of 10 saw blades for cutting construction wood, wet wood, firewood, with nails / metal, chipboard and MDF, plywood, plastic and sheet metal, profiles and small pipes. Enables fast and precise straight and curved / plunge cuts.
The GRAPHITE Widia saw blade (ref. 55H694) has an outside diameter of 235 mm and is made from C50 special steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB (alternate) geometry for accurate cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Saw blade, widia, 210 x 30 mm, 40 teeth 57H683 by GRAPHITE is an accessory designed for working with plywood and wood, with a diameter of 210 mm and an internal bore of 30 mm. Equipped with 40 robust TCT teeth. The thickness of the blade is 1.2 mm and the tooth width is 2 mm. It has a fast cut function and a maximum speed of 6500 min-¹. The GRAPHITE brand blade is designed for the saw number 58GE121. Offered with 25.4/20/16 reductions, it is recommended for both professional and amateur use.
The sabre saw blade for straight cutting of thick metals (5 - 250 mm), 300 mm, HM 58-029 by NEO TOOLS is a blade designed for use in thick metals from 5 to 250 mm and cast iron. It offers a straight cut. It has a tooth spacing of 3 mm, which is TPI 8. It is made from robust HM. The sabre saw blade from the NEO TOOLS brand features an overall length of 300 mm, a width of 24 mm and a thickness of 1.2 mm. It will be suitable for professional applications and advanced DIY projects.
Sabre saw blade, HCS, 152 × 19 × 1 mm, 8 TPI, set of 2 pieces 58-045 by NEO TOOLS with HCS blade and 8 TPI pitch, features dimensions 152 × 19 × 1 mm. The tooth pitch is 3 mm. The blade is designed for straight cuts in construction wood, plywood, wood panels (<75 mm), chipboard and MDF and plastic in the range of 6-100 mm. The NEO TOOLS brand set contains 2 pieces of tools.
Sabre saw blade for clean cutting of insulation, rubber, cardboard 300 mm, HCS 58-027 by NEO TOOLS is a saw blade made of HCS. It is designed to work with polystyrene foam, cardboard, insulation wool, sponge and soft plastic (up to 250 mm in diameter). Offers a type of clean cut. It features an overall length of 300 mm, a width of 19 mm and a thickness of 1.3 mm. It has a tooth spacing of 10 mm. It will be suitable for both professionals and do-it-yourselfers.
The sabre saw scraper for cutting in hard materials 50 mm, HCS 57-946 by NEO TOOLS is an HCS scraper characterised by an overall length of 140, a width of 50 mm and a thickness of 1.5 mm. It is recommended for use with hard materials - linoleum, hard adhesive, plasterboard joint compound, ceramic tile adhesive and vinyl tiles. The NEO TOOLS tool is designed for a sabre saw, for scraping.
Sabre saw blades, BIM, 152 x 19 x 0.9 mm, 18 TPI, set of 2 pieces 58-040 by NEO TOOLS are two blades made with BIM technology, which have 18 TPI and dimensions of 152 x 19 x 0.9 mm (tooth spacing 1.4 mm). They are designed for straight cuts in demanding materials: thin sheet metal (1.5-4 mm), open/closed pipes and profiles (5-100 mm diameter). The flexible design improves guidance control and durability when working with a wide variety of sections.
