Metallintyöstökoneet

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Excellent for producing clean visible edges and weld preparation
• For machining steel and aluminum
• Due to adjustable guide rollers on the support table also suitable for deburring of tubes with Ø 150 - 350 mm (optional 300 - 600 mm)
• Setting the chamfer height without tools
• Stepless angle adjustment from 0 - 60 °
• Handy and powerful device
• With two 6-way insert holders
• Feed is done manually
• Included carbide indexable inserts are also suitable for machining stainless steel at reduced speeds - tool life depends on specific operating conditions

• Best power transmission through aluminium pulleys in combination with toothed GATES quality wedge belt
• High smoothness thanks to ground multi-tooth handle
• Concentricity guaranteed to be less than 0.015 mm measured in the drill
• Separate emergency stop switch
• High-quality OPTIMUM quick-release drill chuck as standard
• Large-sized, height-adjustable protective screen with safety switch for maximum protection of the user
• Drilling depth stop
• V-belt cover with safety switch
• V-belt clamping device
• Right/Left Run
• Machine light in the drill head Integrated
• Precisely worked, stable drilling table with 2 diagonally running T-slots, 360° rotatable and circumferential cooling water channel
• Thick-walled casting column for high force absorption and stability
• Massive base plate, large sized and heavily ribbed on the back

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Feed and sanding belt speed infinitely adjustable
• Even deburring, cleaning or polishing of pipes
• Two oppositely running sanding belts on a rotating head, the rotation of the workpiece is eliminated
• Feed unit with rubber rollers ensures safe transport of the workpiece
• Profile is simply tensioned by handwheel in feed unit
• Connecting piece for suction
• Easy sanding belt change
• Foot pedal for controlling the rotary head

• Standard with corrugated round brush (250 x 40 x 24 mm with wire Ø 0.5 mm) for steel processing
• with adjustable prism workpiece support
• large screen to protect against
• Sparks and flying chips
• S version with suction unit with separate motor and filter bag

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen

• For producing all round shaped parts such as pipes, cylinders, etc.
• Roller drive via hand crank or motorized on E models
• Heavy and stable cast iron construction
• Asymmetric 3-roll system for easy pre-bending
• The upper roller is adjustable, thus easy removal of the finished workpiece
• Swiveling top roller
• Easily adjustable upper and lower roller
• Possibility of conical bending
• With safety devices
• Standard wire insert groove on bottom and back roller
• The foot control leaves both hands free for the material supply

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• LED lighting above the grinding wheels for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• Integrated spark guard on the grinding wheels reduces flying sparks
• Protective discs made of shatterproof material for additional safety
• Non-slip and vibration-damping rubber feet for a stable stand
• Standard equipment with coarse and fine sanding discs (grit 36 and 80)
• LED lighting above the sanding discs for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Ideal for roofers and tinsmiths in assembly use, e.g. for making bay and valley flashings or chimney claddings
• Equipped with transport rollers with locking brake

• Versatile and mobile
• Ideal for roofers and tinsmiths in installation work, e.g. for making bay and valley flashings or chimney cladding
• Simple design enables precise work
• Equipped with transport rollers with parking brake
• Safe, material-friendly operation
• Secure fixing of the workpiece via lever
• Swivel bending process via bow handle

• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change

• Powerful motor with inverter and reduction gear produces high torque
• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change
• All shafts hardened and ground
• Material clamping is done manually
• Very good price / performance ratio

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• High quality steel knives with a hardness of HRC55-60
• Equipped with two control handles
• Front bearing surface with scale
• Up to 500 mm adjustable backgauge

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

• For machining stainless steel, cast iron, aluminum, non-ferrous metals, plastics, etc.
• Heavy duty motor with soft start and overload protection
• With constant electronics for constant speed even under load
• Optimal adaptation to the workpiece through stepless adjustment of the speed
• Rotational speeds can be conveniently controlled via the thumb wheel on the rubberized handle
• Very robust gearbox
• Fatigue-free working thanks to ergonomic two-hand operation
• As standard with Velcro fleece for reworking already mounted stainless steel railings

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• Smooth running thanks to ground multi-tooth driver
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• Safety light barrier from LEUZE in front of the machine and the material transporter
• More powerful motor optionally available
• Saw blade guides with integrated cooling system