Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.
Accessories for mini sander, sanding belts, flap wheels, set of 24 pieces 55-081 by NEO TOOLS is a set of 24 pieces for working with metal, wood, ceramics, glass and plastics. It includes 9 aluminium oxide sanding belts with a diameter of 6.3 mm and gradation P120 and 9 belts with a diameter of 12 mm and gradation P60, as well as 2 sanding drums for mounting them and a 3.2 mm mandrel. The NEO TOOLS set is completed with flap wheels: 2 pieces of 16 mm diameter with a 3.2 mm shank and 1 piece of 32 mm diameter with a 3.2 mm shank. The accessories are designed to operate at a maximum speed of 22,000 rpm.
The 75-151 laser beam detector by NEO TOOLS is used to find the beam emitted by cross lasers, levellers and other laser devices, increasing their real working range many times over. It enables precise beam detection at distances of up to 50 m with an accuracy of ±1.5 mm and is compatible with 10K lasers. It can be used on its own or together with a tripod mount using a ¼" thread. Two vials make it easy to position the detector correctly, and it is powered by two AAA batteries for up to 20 hours of operation. An IP54-rated housing and an operating temperature range of -10℃ to 45℃ increase the unit's resistance to typical construction site conditions. The NEO TOOLS detector is CE certified.
NEO TOOLS' S1 SR Neo Air work boots, steel toecap, size 46, 82-176-46 is a safety shoe from NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200 J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 45, 82-176-45 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 44, 82-176-44 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 39, 82-176-39 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' O1 SR Neo Air work half-boots, size 43, 82-782-43 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' O1 SR Neo Air professional half boots, size 42, 82-782-42 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 47, 82-176-47 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' O1 SR Neo Air professional half boots, size 41, 82-782-41 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 40, 82-176-40 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
Steel Brushes, Brush, Cup Brush, Disc Brush, Set of 3 Pieces 55-066 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from corrugated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.
NEO TOOLS' O1 SR Neo Air work half-shoes, size 40, 82-782-40 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 42, 82-176-42 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' O1 SR Neo Air work half-boots, size 46, 82-782-46 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' O1 SR Neo Air work half-boots, size 47, 82-782-47 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 43, 82-176-43 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
NEO TOOLS' O1 SR Neo Air work half-boots, size 39, 82-782-39 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.
NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 41, 82-176-41 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.
