UUTUUDET

Wire brush for petrol scythe 200 x 25.4 mm, hard, knotted wires 55-101 by NEO TOOLS is a brush disc for petrol scythes. It has dimensions of 200 x 25.4 mm outer diameter and inner bore. It makes it possible to clean cobblestones and metal surfaces. It was made of durable wire weave, with a wire diameter of 0.5 mm. The NEO TOOLS brand is a guarantee of durability for years.

Abrasive sponge 98 × 25 × 68 mm, P180, bevelled, 55-927 by NEO TOOLS is a 98 × 25 × 68 mm tool with gradation P180, designed for working with metal, plastics and wood. The flexible backing and slanted profile allow even sanding of flat surfaces, edges and corners. The 98 × 68 mm format provides a comfortable grip when working by hand. The P180 model from NEO TOOLS is suitable for a wide range of sanding tasks.

Wire brush for petrol scythe 150 x 25.4 mm, hard, 55-100 tangled wires by NEO TOOLS is a brush disc for petrol scythes. It has dimensions of 150 x 25.4 mm outer diameter and inner bore and 0.5 mm wire diameter. It makes it possible to clean cobblestones and metal surfaces. It is characterised by a maximum speed of 6500 rpm. It is made of durable wire weave. The NEO TOOLS brand is a guarantee of durability for years.

Screwdriver bits PZ2 x 25 mm, 100 pieces 56-624 by NEO TOOLS are PZ2 type bits with a length of 25 mm. Mounted on a ¼" HEX thread. They are characterised by high resistance to deformation and are recommended for high frequency work. Part made from S2 steel. The bits are recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop. Set of 100 pieces from NEO TOOLS.

HSS-Co 4.5 mm metal drill bit, 10 pcs. 57-028-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 47 mm and its overall length is 80 mm. The maximum speeds are: INOX 825-900 rpm, general metals 1650-1800 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.

PH2 x 25mm impact bits, 20 pieces 56-531 by NEO TOOLS are PH2 impact bits, 25mm in length. Supplied in a set of 20 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.

Impact bits PZ1/2/3 x 50 mm, 3 pieces 56-542 by NEO TOOLS are impact bits PZ1, PZ2, PZ3, with a length of 50 mm. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well for professional and DIY tasks. Supplied in a set of 3.

Velcro sanding paper 115 x 230 mm, P60, 5 pcs, with holes 54-002 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by gradation P60 and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates efficient and quick exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.

Velcro-mounted delta sanding paper 93 x 93 mm P80, 5 pieces, with holes 55-765 by NEO TOOLS is a Velcro-mounted sanding paper that is designed for working with metal, wood and plastic materials. The sheets are characterised by holes with a diameter of 8 mm, facilitating work with dust extraction. These accessories use an electro-corundum grain and semi-open mesh, which reduces clogging when roughing. The backing is E-type paper, providing the correct stiffness and stable pressure on the surface. The set contains 5 delta sanding papers from NEO TOOLS.

The 125 x 22.2 mm, P120 flap wheel, 55-991 by NEO TOOLS is a 125 mm diameter, P120 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth flaps increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.

The NEO TOOLS 55-931 90° angled bit socket is equipped with a 1/4" HEX handle. Its maximum rotational speed is 600 rpm. It is designed to work with screwdriver bits in the 1/4" HEX standard, in places with limited access.

The 140 mm, pull-up stirrer 56-703 by NEO TOOLS is the working part of the NEO TOOLS stirrer with a diameter of 140 mm. It has a pull-up design and a length of 265 mm. It is fitted with an M14 female thread so that it can be mounted on suitable stirrer drives. The component is compatible with the 56-700 NEO TOOLS mandrel.

Sanding paper 115 x 160 mm, holes, tear-off perforation, Velcro, P40, 3 pieces 55-812 by NEO TOOLS is a Velcro-fixed paper that comes in a set of 3 and is equipped with 8 holes of 8 mm diameter each. It allows working with dust extraction. The tear-off perforation allows you to quickly fit the sheet to your work foot or shorten it to the required format without tools. Graduation P40 works well for specific machining and applications include metal, wood and plastic materials.

Diamond hole saw for drill rig 58G540 112 × 450 mm × 10T, 57-863 by NEO TOOLS is a hole saw designed for diamond drill rig with part number 58G540 GRAPHITE. The accessory is characterised by a diameter of 112 mm and a working height of 420 mm and a total height of 450 mm. It has 10T teeth with a height of 10 mm and a 1.1/4 UNC thread. The NEO TOOLS brand hole saw is made of robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramics, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.

HEX6 x 25 mm impact bits, 2 pieces 56-509 by NEO TOOLS are compact, impact-resistant bits for hexagon socket screws, made of S2 steel and suitable for intensive assembly cycles. The HEX6 profile ensures secure seating in the screws, while the 1/4" HEX shank guarantees wide compatibility with bit holders and magazines. The set of 2 makes it easy to rotate accessories and keep things running smoothly in the service, during assembly or in the workshop.

Impact bits TX30 x 50 mm, 2 pieces 56-528 by NEO TOOLS type TX 30 with a length of 50 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.

The 355 x 3 x 25.4 mm, 41 A24-S-BF, 57-738 metal cutting disc by NEO TOOLS is a 355 x 3 x 25.4 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.

Velcro sanding paper 115 x 230 mm, P100, 5 pcs, with holes 54-004 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by gradation P100 and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates quick and efficient exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.

Velcro sanding paper 115 x 230 mm, P240, 5 pcs, with holes 54-007 by NEO TOOLS with dimensions 115 x 230 mm. It is characterised by the P240 gradation and is intended for orbital sanders (e.g. GRAPHITE 59G239 grinder). The paper is recommended for use with wood, metal and plastic. The Velcro fastening facilitates quick and efficient exchange. NEO TOOLS paper has 10 dust extraction holes, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 115 x 230 mm is recommended for professionals and experienced DIY enthusiasts.

The SDS Plus 14 x 160 mm, quatro 54-123 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 160 mm and a working length of 90 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.