UUTUUDET

Tarkastelu: Ruudukko Lista

Lajitteluperuste:

Näyttö / sivu

02-56T660

Grinding stone set, 5 pieces 56T660 by GRAPHITE contains 5 stones of different shapes for grinding, smoothing and machining materials. The working part is made of electro-corundum and each piece has a 6mm diameter shank, allowing use in rotary tools. The set is designed to operate at a maximum speed of 8,000 - 26,000 rpm and is used in metal and plastic machining. Pink grit - metal application, white grit - plastics and aluminium application, grey grit - plastics and metals application. The different shapes of GRAPHITE stones allow working on both flat surfaces and in hard-to-reach areas.

2,41€

On request in weeks

Cordless Blower / Vacuum XGT® 40Vmax • 13.8 m³/min • bare tool

40-UB003GZ

The Makita UB003GZ is a professional 40Vmax XGT® cordless blower/vacuum combining blowing, vacuuming and mulching in one powerful tool. It delivers performance comparable to a 28 cc petrol blower, while offering quieter operation, zero exhaust emissions and reduced maintenance.

The blower provides a maximum air volume of 13.8 m³/min, while the vacuum mode delivers up to 13.0 m³/min, making it ideal for efficient garden and job‑site clean‑up. Tool‑less switching between blower and vacuum modes and built‑in mulching blades reduce debris volume and extend bag-emptying intervals.

User comfort is enhanced by a variable speed trigger, cruise control lever, and a telescoping blower nozzle. The tool is also equipped with XPT (Extreme Protection Technology) for improved dust and water resistance.

This is a bare tool (Z version) – battery and charger are not included.

Key Features:

Battery platform: XGT® 40Vmax
Max air volume (blower): 13.8 m³/min
Max air volume (vacuum): 13.0 m³/min
Max air speed: up to 244 km/h
Functions: blower / vacuum / mulcher
Collection bag capacity: 50 L
Brushless motor (BL)
Variable speed trigger with cruise control
XPT dust and water resistance
Bare tool – battery and charger not included

320,60€ 470,00€

Varastossa 3

Sabre saw blades, BIM, set of 3.

03-58048

Sabre saw blades, BIM, set of 3 pieces 58-048 by NEO TOOLS includes three variants selected for different metal work. The first blade is TPI 24, 152 x 19 x 0.9 mm (pitch 1 mm) - designed for thin sheet metal 0.7-3 mm and thin open/closed pipes and profiles (Ø 5-100 mm); it provides straight cuts and is flexible in guidance. The second is TPI 8-18, 152 x 19 x 0.9 mm (stroke 1.4-3.4 mm) - suitable for 1-8 mm sheets and open/closed tubes and profiles (Ø 5-100 mm); works well for straight cutting and fast cutting. The third is TPI 14, 228 x 19 x 0.9 mm (pitch 1.8 mm) - dedicated to 3-8 mm thick sheet metal and tubes and solid profiles (Ø 10-175 mm), offering fast cutting and flexibility. The BIM (bi-metal) design combines a resilient construction with a tough cutting edge.

15,50€

On request in weeks

Sabre saw blades 300 x 19 x 0.9 mm, 14TPI, cpl. 2 pcs.

03-57948

Sabre saw blades 300 x 19 x 0.9 mm, 14 TPI, set of 2 pieces 57-948 by NEO TOOLS are two saw blades made of BIM material, which have 14 TPI and dimensions 300 x 19 x 0.9 mm (tooth pitch 1.8 mm). They are designed for fast cuts in demanding materials: sheet metal (3-8 mm), pipes and solid profiles 10-250 mm. The flexible design improves guidance control and durability when working with a wide variety of sections.

11,20€

On request in weeks

Grinding stone set, 10 pcs.

02-56T661

Grinding stone set, 10 pieces 56T661 by GRAPHITE contains 10 stones of different shapes for grinding, smoothing and machining materials. The working part is made of electro-corundum and each piece has a shank with a diameter of 6 mm or 3 mm, allowing use in rotary tools. The set is designed to operate at a maximum speed of 8,000 - 26,000 rpm and is used in the machining of metal and plastics. Pink grit - metal application, white grit - plastics and aluminium application, grey grit - plastics and metals application. The different shapes of GRAPHITE stones allow working on both flat surfaces and in hard-to-reach areas.

5,00€

On request in weeks

Sanding paper 93 x 230 mm, P120, 5 pcs, with 8 holes

03-55751

Sanding paper 93 x 230 mm, P120, 5 pcs, with holes 55-751 by NEO TOOLS with dimensions 93 x 230 mm. It is characterised by gradation P120 and has a rectangular shape. The paper is recommended for use with wood, metal and plastic. It has 8 dust extraction holes - each with a diameter of 10 mm, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 93 x 230 mm NEO TOOLS is recommended for professionals and experienced DIYers.

2,19€

On request in weeks

Robotic Lawn Mower RCX 6

54-1.269-760.0

Key Features & Benefits:

Wire‑free operation using GPS, RTK and AI camera navigation
Mowing area up to 3,000 m²
All‑wheel drive for slopes up to 70%
AI 3D stereo camera for surface recognition and obstacle avoidance
Parallel track mowing for maximum efficiency
Automatic cutting height adjustment from 2 to 10 cm
Multi‑zone management with no‑go zones
App control with scheduling and advanced customization
Gentle lawn‑friendly turning with 360° flexible rear wheel

Technical Specifications:

Maximum lawn area: up to 3,000 m²
Navigation technology: GPS / RTK / AI camera
Cutting width: 35 cm
Cutting height: 2–10 cm (automatic, app‑controlled)
Maximum slope: up to 70%
Drive system: All‑wheel drive
Battery type: Lithium‑ion
Battery voltage: 18 V
Battery capacity: 5.0 Ah
Mowing time per charge: approx. 75 min
Charging time: approx. 35 min
Number of mowing zones: up to 10
Sound power level: approx. 60 dB(A)
Dimensions (L × W × H): approx. 868 × 535 × 297 mm
Weight: approx. 14.4 kg

1879,00€ 3913,00€

Varastossa 5+

Kärcher Robotic Lawn Mower RCX 6 + Cordless Lawn Trimmer LTR 18‑30 Battery Set (30 cm)

54-1.269-760.0-SET

This bundle combines a high‑end robotic lawn mower with a cordless grass trimmer, providing a complete solution for efficient lawn maintenance.

Kärcher RCX 6 Robotic Lawn Mower

The RCX 6 operates without a boundary wire, using GPS, RTK and an AI camera for precise navigation. It is suitable for lawns up to 3000 m² and mows efficiently in parallel tracks. With all‑wheel drive, it handles slopes of up to 70%, while cutting height can be adjusted between 2 and 10 cm via the app.

Kärcher LTR 18‑30 Battery Set

The LTR 18‑30 cordless trimmer with a 30 cm cutting width is ideal for edging and trimming tight spaces. It features automatic line feed, a rotatable head for edge cutting, and comes complete with battery and fast charger.

1879,00€ 3913,00€

Varastossa 5

Tolmuimeja põrandaotsik, DN35, 300mm, must, märg-ja kuivpuhastus

54-6.906-512.0

39,95€ 47,00€

On request in 1-2 weeks

Tolmuimeja imemistoru 2xNT, DN35, 550mm kroomitud teras

54-2.889-191.0

44,20€ 52,00€

On request in 1-2 weeks

Universaalsaetera BIM 225mm (10+12+14tpi), 5tk. metall Töödetav materjal: teras, roostevaba teras

43-E-26294

Bi-metal konstruktsioon tagab optimaalse tasakaalu painduvuse ja kulumiskindluse vahel, võimaldades teradel vastu pidada ka intensiivses kasutuses. Tänu optimeeritud hammaste geomeetriale ja muutuvalehammaste sammule on lõige puhas, sujuv ning kontrollitud erineva paksusega metallides – alates õhukesest plekist kuni tugevamate profiilide ja torudeni.

20,44€ 26,20€

On request in weeks

Akupuurvasar XGT® 40Vmax • SDS-PLUS • 28 mm • 3,3 J

40-HR012GZ

"HR012G on 40Vmax XGT® akuga töötav SDS-PLUS puurvasar, mis on loodud nii puurimis- kui ka meiseldamistöödeks erinevates materjalides. Tööriist on kompaktne ja kerge ka siis, kui sellele on paigaldatud tolmueemaldussüsteem.
Tööriistal on kolm töörežiimi: ainult puurimine, löökpuurimine ning ainult meiseldamine.
Väändepiirik/koormuspiirik peatab pöörlemise, kui otsak kinni kiilub, pakkudes täiendavat kaitset mootorile ja vähendades tööga seotud riske.
Elektrooniline lüliti ja muudetava kiirusega päästik võimaldavad täpselt reguleerida pöörlemiskiirust ja löögisagedust, kohandades tööriista erinevateks rakendusteks.
Püsikiirushoidmine tagab ühtlase tööjõudluse ka muutuvate koormuste korral.
Vibratsioonikoormuse vähendamiseks kasutab tööriist Anti-Vibration Technology’t, mis ühendab endas tasakaalustusmehhanismi, spetsiaalse käepidemekonstruktsiooni ja vibratsioonisummutava käepideme. See süsteem aitab vähendada käte väsimust pikaajalisel töötamisel.
Active Feedback sensing Technology suurendab kasutaja ohutust, peatades mootori automaatselt, kui pöörleva otsaku juures tuvastatakse järsk takistus.
Puurvasar ühildub SDS-PLUS tarvikutega ning võimaldab tolmueemaldust juhtida Bluetoothi kaudu Auto-start Wireless System’i abil.
XPT-veekindlus suurendab tööriista vastupidavust rasketes töötingimustes.
Kaks-LED-töötuld koos eel- ja järelkuma funktsiooniga parandab nähtavust vähese valgusega keskkondades."

414,83€ 553,10€

On request in weeks

Bit holder, 1/4", 60 mm

03-39338

Bit holder, 1/4", 60 mm 39-338 by NEO TOOLS is a holder in magnetic design, designed to work with screwdriver bits of the same profile. The chuck's design, combining compact length with magnetic bit protection, facilitates precise guidance and reduces the risk of the bit falling out during installation. The ¼" HEX version ensures dimensional compatibility between bit and socket, resulting in secure seating and repeatable work.

1,67€ 1,80€

Varastossa 5+

SDS Plus reinforced concrete drill bit 8 x 310 mm, quatro

03-54107

The SDS Plus 8 x 310 mm, quatro 54-107 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.

5,60€

On request in weeks

Impact bits TX40 x 25 mm, 2 pcs.

03-56517

Impact bits TX40 x 25 mm, 2 pieces 56-516 by NEO TOOLS type TX40 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.

2,10€

On request in weeks

Sabre saw blade, HCS, 150 x 19 x 1.3 mm, 3TPI, cpl. 2 pcs.

03-58041

Sabre saw blade, HCS, 150 x 19 x 1,3 mm, 3 TPI, set of 2 pieces 58-041 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 3 TPI toothing and a stroke of 8,5 mm. The tools have dimensions of 150 x 19 x 1.3 mm. They are designed for branches and wood without nails (20-100 mm) - they also work well for cutting fresh wood (diameter <100 mm). The design of the NEO TOOLS blades allows for plunge, coarse and curved cutting, making quick maintenance and carpentry work easier.

4,40€

On request in weeks

S1 SR work boots, ESD, composite toecap, size 45

03-8217845

NEO TOOLS' S1 SR, ESD, composite toecap, size 45, 82-178-45 work boots are made of rip-stop knitted upper and mesh knitted lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.

67,29€

On request in weeks

S1 SR work boots, ESD, composite toecap, size 43

03-8217843

NEO TOOLS' S1 SR, ESD, composite toecap, size 43, 82-178-43 work boots are made with a rip-stop knitted upper and a knitted mesh lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.

67,29€

On request in weeks

Desk fan 45W

03-90016

The 45 W desk fan 90-016 by NEO TOOLS is a useful device with a power of 45 W, which is powered by 230 V ~ 50 Hz. It has automatic horizontal oscillation and mechanical vertical oscillation, allowing you to adjust the direction of the wind. The fan is equipped with three operating speeds, a carrying handle and a 1.66 m power cord. The blade diameter is 141 mm and the grille diameter is 202 mm. The NEO TOOLS desk fan has an aluminium motor and is designed to ventilate and keep rooms cool.

36,51€

On request in weeks

Impact bits TX10/15/20/25/30/40 x 25 mm, 6 pcs.

03-56541

Impact bits TX10/15/20/25/30/40 x 25 mm, 6 pieces 56-541 by NEO TOOLS type TX10, TX15, TX20, TX25, TX30, TX40 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy-duty work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. Six pieces are offered in the set - for professionals and DIY enthusiasts.

3,79€

On request in weeks