Voimatyökalut, työstökoneet

Generaattorit

Tarkastelu: Ruudukko Lista

Lajitteluperuste:

Näyttö / sivu

Velcro-backed delta sanding paper 93 x 93 mm P40, 5 pcs, with 6 holes

03-55763

Velcro-mounted delta sanding paper 93 x 93 mm P40, 5 pieces, with holes 55-763 by NEO TOOLS is a Velcro-mounted sanding paper that is designed for working with metal, wood and plastic materials. The sheets are characterised by holes with a diameter of 8 mm, facilitating work with dust extraction. These accessories use an electro-corundum grain and semi-open mesh, which reduces clogging when roughing. The backing is E-type paper, providing the correct stiffness and stable pressure on the surface. The set contains 5 delta sanding papers from NEO TOOLS.

1,20€

On request in weeks

HSS-Co 4.0 mm metal drill bits, 10 pcs.

03-5702410

HSS-Co 4.0 mm metal drill bit, 10 pcs. 57-024-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 43 mm and its overall length is 75 mm. The maximum speeds are: INOX 925-1000 rpm, general metals 1850-2000 rpm. The purpose of this drill bit by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.

14,40€

On request in weeks

Soil auger M14 for 58G084, 80 x 600 mm

03-56780

M14 soil auger for 58G084, 80 x 600 mm 56-780 by NEO TOOLS is an M14 threaded accessory with a diameter of 80 mm and an overall length of 600 mm (working length 440 mm). The robust drill bit is designed for use with the Energy+ 58G084 GRAPHITE cordless mixer. The auger is used for drilling holes in the ground - especially in hard and difficult ground with obstacles such as stones or roots. Indispensable when working in the garden to drill holes for planting trees, as well as installing fences, guards and plant supports. The working part is made of high quality 65 Mn spring steel and the steel construction with 4 mm thick blades, single helix and double plate ensures that the tool is very strong and penetrates the soil effectively.

40,90€

On request in weeks

Sabre saw blades, HCS, set of 3 pcs.

03-58047

Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.

13,70€

On request in weeks

Accessories for mini sander, sanding belts, flap wheels, set of 24 pcs.

03-55081

Accessories for mini sander, sanding belts, flap wheels, set of 24 pieces 55-081 by NEO TOOLS is a set of 24 pieces for working with metal, wood, ceramics, glass and plastics. It includes 9 aluminium oxide sanding belts with a diameter of 6.3 mm and gradation P120 and 9 belts with a diameter of 12 mm and gradation P60, as well as 2 sanding drums for mounting them and a 3.2 mm mandrel. The NEO TOOLS set is completed with flap wheels: 2 pieces of 16 mm diameter with a 3.2 mm shank and 1 piece of 32 mm diameter with a 3.2 mm shank. The accessories are designed to operate at a maximum speed of 22,000 rpm.

5,60€

On request in weeks

Alusraam GTA700

48-S0601B22900

100,27€ 130,34€

On request in weeks

Saepink 254mm 2200W GTS100-254

48-S0601B30700

Oma klassi parim lõikekõrgus 100 mm: välistab töödeldava materjali ümber pööramise vajaduse, tagades nii kiiremad ja täpsemad pikad lõiked

Täpsed pikilõiked kuni 825 mm: hammaslatt-piire tagab võrratu täpsuse

Kaks tolmuava, ainulaadsed kinnitustsoonid, ühilduvus pehmendusega, kiire pidurisüsteem ja pehme käivituse funktsioon kasutajakaitse ja mugavuse parandamiseks kasutamise ajal

Lisatööriista kasutamise vajaduseta kaldenurga altlõike reguleerimine automaatse lähtestusega 0° ja 45°: nii saate keskenduda oma käsitööle ilma segajateta.

Tehnilised andmed:

Nimivõimsus 2 200 W
Pingi mõõtmed 713 x 579 mm
Tühikäigupöörded 4 500 p/min
Saeketta läbimõõt 254 mm
Lõikekõrgus 90° 100 mm
Lõikekõrgus 45° 68 mm
Ketta siseava Ø 30 mm
Vertikaalse kaldenurga reguleerimine 47 ° V / -2 ° P
Kaal 28,7 kg

Komplekti kuulub:

Kuuskantvõti
Imiadapter
Paralleeljuhik
Imiadapteriga kaitsekate
Silmusvõti
Profiilsiin
Etteandeabinõu
Nurgajuhik
Saeketas Optiline Wood, 254 × 2,8/1,8 × 30 mm, 24

736,56€ 956,57€

On request in 1-2 weeks

Drill stand diameter 43 mm, stroke 60 mm

02-56T801

The drill stand 43 mm diameter, 60 mm stroke 56T801 by GRAPHITE is a practical drill holder for drills with a mounting diameter of 43 mm. The product has a maximum drilling depth adjustment of up to 60 mm, which facilitates precise serial drilling to a specific point in the material surface.

28,30€

On request in weeks

Steel brushes, brush, cup, disc, cpl. 3 pcs.

03-55066

Steel Brushes, Brush, Cup Brush, Disc Brush, Set of 3 Pieces 55-066 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from corrugated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.

2,19€

On request in weeks

Drill stand diameter 43 mm

02-56T800

The 56T800 drill stand diameter 43 mm by GRAPHITE is a practical holder for drills with a mounting diameter of 43 mm. The product has an adjustable drilling depth and a guide for drilling into pipes, which makes it easier to drill precise holes in parts with a rounded shape.

39,39€

On request in weeks

T.C.T hammastega saeketas paksu metalli jaoks 185x30x36T, SPECIALIZED

43-E-26082

Õhemad lõikehambad ja ketas ise vähendavad lõiketakistust ning parandavad töö efektiivsust, võimaldades kiiremat lõikamist väiksema koormusega tööriistale. Vastupidav cermet-tehnoloogiaga hammaste konstruktsioon tagab suurepärase kulumiskindluse ning võimaldab lõigata kuni 32 mm paksust terast sujuvalt ja efektiivselt. Uuendatud hambavahede disain parandab metallilaastude eemaldamist, vähendades kuumenemist ja aidates säilitada stabiilset lõikekiirust ka intensiivsel kasutamisel. Lisaks toetab lamedate hammaste esipinna erilihv veelgi paremat laastueemaldust, mille tulemuseks on puhtam ja täpsem lõige.

99,30€ 127,30€

On request in weeks

Puidupuur 4 lõikeservaga, 32x165mm, 1/4” HEX varrega

43-E-26705

PEAMISED EELISED • 1/4” HEX vars – sobib mugavalt akutrellidele ja löökkruvikeerajatele • 4 spiraali ja 4 lõikeserva – kiirem materjali eemaldus ning väiksem koormus lõikeservadele • Keermestatud tsentreeriv ots – puur tõmbab end ise materjali sisse, vajab vähem survet • Puhas ja täpne puurimine – vähendab pindude ja rebendite tekkimist • Pikem kasutusiga – ühtlane lõikamine aitab vähendada kulumist • Efektiivne laastude eemaldus – spetsiaalne spiraal viib materjali kiiresti august välja

21,60€ 27,70€

On request in weeks